Abstract:To explore the modification mechanism of BS-12 (dodecyl dimethyl betaine) on different clay, this study chose bentonite and kaolin as the subjects. The modification mechanism was determined via the changes in the S-BC (sum of BS-12 and Ca2+/2 adsorbed on clay) curves. This mechanism was verified through the Vanselow ionic selectivity coefficients, adsorption isotherms and superficial characteristics such as TOC (total organic carbon) content, XRD (x ray diffraction) and SBET (specific surface area). Results indicated that: 1) Ion exchange and hydrophobic bonds coexisted in the process of bentonite and kaolin modification with BS-12, and the hydrophobic modification began to appear at BS-12 modification ratios of 40.09% and 29.11% CEC (cation exchange capacity) of bentonite and kaolin, respectively. After 85.30% and 78.44% CEC of bentonite and kaolin, respectively, hydrophobic modification was stronger than ion exchange and became the main modification mechanism. 1) LnK(v) [(the natural logarithm for K-v (Vanselow selectivity coefficients)] of two clays were all greater than 1, indicating that the adsorption preferences for BS-12 were greater than Ca2+, meanwhile the LnKv values increased significantly with the increase in BS-12 modification ratios. 3) Adsorption isotherms increased sharply before an inflection point occurred at the modification ratio of 60% (bentonite) and 40% (kaolin) CEC of clay, then the ascensional range decreased after this modification ratio. Lastly, both rapidly rose again after the modification ratio of 100% CEC of the two clays. 4) TOC content, door of two clays and S-BET of bentonite all showed no significant distinction between bentonite and 25%BS bentonite, S-BET had significant differences between kaolin and 15%BS kaolin. On the other hand, characteristics of 50% and 100%BS bentonite, 30% and 60%BS kaolin all significantly increased (for TOC and d(001)) or reduced (for S-BET) compare with that of 25%BS bentonite and 15%BS kaolin, respectively.

Stability of BS-CTMAB complex modified bentonite

Mechanism of CTMAB Modifying BS-12 Modified Bentonite

Studies on Cr(Ⅵ)and Cd2+adsorption Onto Bentonite Modified by a BS-12+DTAB Complex

Adsorption of Congo Red Dye Onto Raw and Chitosan-Modified Bentonite

Complex modification of amphoteric modified bentonite with Tween20 and its structure characteristics

Synthesis and Characterization of Ctmab and Pdmdaac Modified Organobentonite

Thermodynamics and Surface Characteristics of DTAB and BS-12 Co-Modified Bentonites

Adsorption of Phenol on Amphoteric-Cationic Modified Bentonites

Comparison of Cd2+ Adsorption Onto Amphoteric, Amphoteric-Cationic and Amphoteric-Anionic Modified Magnetic Bentonites

MODIFICATION MECHANISM OF AMPHOTERIC MODIFIER BS-12 ON TWO DIFFERENT CLAYS

Comparison of Amphoteric-Cationic and Amphoteric-Anionic Modified Magnetic Bentonites: Characterization and Sorption Capacity of Phenol

[Effect of SDS on the Adsorption of Cd2+ Onto Amphoteric Modified Bentonites].

Secondary Modification Mechanisms of BS-12 Modified Bentonite with DTAB and Phenanthrene Adsorption by Combinedly Modified Bentonite

Enhanced sorption of naphthalene and nitroaromatic compounds to bentonite by potassium and cetyltrimethylammonium cations.

Study on the Surface-Physicochemical-Property Changing of Bentonite by Adapting a New Soil Stabilizer

Characterization and adsorption performance of phenol on amphoteric modified magnetic bentonites

Effect of double carbon chains on enhanced removal of phenol from wastewater by amphoteric-gemini complex-modified bentonite

Interlayer and Surface Characteristics of Carboxymethyl Cellulose and Tetramethylammonium Modified Bentonite

Enhanced Removal of Phenol by Novel Magnetic Bentonite Composites Modified with Amphoteric-Cationic Surfactants

Cu2+adsorption and Retardation Effect of Compound Adsorbent by Adding Bacterium Powder and Amphoteric Modified Clay in Active Calcium Silicate

Chromium (vi) Adsorption Characteristics of Bentonite under Different Modification Patterns