Research and numerical simulation on nitrogen injection scheme in goaf of 1303 fully mechanized caving face in Jinniu mine

Baoshan JIA,Wei WANG,Yun QI,Yong SUN,Shouguo LI

DOI: https://doi.org/10.11731/j.issn.1673-193x.2018.03.012

2018-01-01

Abstract:In order to reasonably design the scheme of fire prevention and control with nitrogen injection in the goaf,taking the 1303 fully mechanized caving face in Jinniu coal mine as the research object,the change of gas concentration in the goaf was measured continuously through arranging the beam tube monitoring system at the inlet air side and return air side of the goaf,then the distribution area of the spontaneous combustion "three zones" in the goaf was divided. Based on the division standard of the spontaneous combustion"three zones" in the goaf and the numerical simulation method,the distribution laws of oxidation spontaneous combustion zone in the goaf under different nitrogen injection quantities and positions were studied by using the fluid dynamics calculation software COMSOL. The results showed that the change of nitrogen injection quantity and position had no significant influence on the upper limit of the oxidation spontaneous combustion zone,and had significant influence on the lower limit of the oxidation spontaneous combustion zone. The most appropriate nitrogen injection position should be about 30 m away from the top cut line. It was obtained that there existed an exponential relationship between the nitrogen injection quantity and the width of the oxidation spontaneous combustion zone by using Origin software,and the opti-mum nitrogen injection rate was 386 m3/h calculated by the fitting formula,at the moment,the width of the oxidation sponta-neous combustion zone was 31.5 m.