Abstract:The typical characteristics of wastewater produced from seafood, chemical, textile, and paper industries are that it contains ammonia, sulfate, and a certain amount of chemical oxygen demand (COD). The sulfate-reducing ammonium oxidation process is a biochemical reaction that allows both ammonia and sulfate removal, but its low growth rate and harsh reaction conditions limit its practical application. Due to the adsorption properties of the iron sponge and its robust structure, it provides a suitable living environment for microorganisms. To reduce the negative impact on the environment, we employed 4.8 kg of sponge iron in a 2.0 dm3 anaerobic sequencing batch reactor (ASBR). We investigated the effects of the type and concentration of carbon sources on the performance of the sulfate-reducing ammonium oxidation (SRAO) process. The results demonstrated that during a start-up period of 90 days, the average ammonium removal efficiency and the sulfate conversion efficiency of the reactor containing the sponge iron were 4.42% and 8.37% higher than those of the reactor without the sponge iron. The addition of the sponge iron shortens the start-up time of this greenhouse gas-free denitrification process and reduces future costs in practical applications. The removal of total nitrogen (TN) significantly increased after adding organic carbon sources and then declined sharply, while the most considerable reduction of ammonium removal efficiency from 98.4% to 30.5% was observed with adding phenol. The performance of the group employing glucose as the carbon source was recovered on the 28th day, with the average ammonium removal efficiency increasing from 49.03% to 83.5%. The results of this simulation study will help the rapid start-up of SRAO in the water treatment industry and can precisely guide the application of the SRAO process for wastewater containing different organic carbon sources.

Processing Effects of Sponge Iron Dosage in Biological Sequencing Batch Reactor

Effects of sponge iron dosage on nitrogen removal performance and microbial community structure in sequencing batch reactors

Effect of Different Valent Iron on Performance of Activated Sludge

Sponge iron enriches autotrophic/aerobic denitrifying bacteria to enhance denitrification in sequencing batch reactor

Coagulation Coupled with Batch Biological Sponge Iron Reactor for Efficient Treatment of Leachate from Waste Transfer Stations

Effect of Ferrous Ion on the Performance of an Anammox Reactor

Applications of Sponge Iron and Effects of Organic Carbon Source on Sulfate-Reducing Ammonium Oxidation Process

Enhanced refractory organics removal by sponge iron-coupled microbe technology: performance and underlying mechanism analysis

STUDY ON THE PRETREATMENT OF COKING WASTEWATER BY SPONGE IRON

Degradation of different wastewater by a biological sponge iron system: microbial growth and influencing factors

Effects of Fe(Iii) on Dissimilatory Ferric Reduction, Nitrogen and Phosphorus Removal in Activated Sludge Process

Research on iron with different valences for the enhancement of phosphorus removal by SBR

Influence of ferric iron dosing on aerobic granular sludge: granule formation, nutrient removal and microbial community

Efficacy and mechanism of enhanced Sb(V) removal from textile wastewater using ferric flocs in aerobic biological treatment

Effect of the Dosage of Ferroferric Oxide on Batch Anaerobic Treatment of High Strength Synthetic Wastewater

Effects of ferrous iron on the performance and microbial community in aerobic granular sludge in relation to nutrient removal

Effect of Fe3+ on the Sludge Properties and Microbial Community Structure in a Lab-Scale A2O Process

Waste activated sludge conditioning in a new Fe<SUP>2+</SUP>/persulfate/tannic acid process: Effectiveness and optimization study to enhance dewaterability

Influence of ferrous iron on the granularity of a UASB reactor

The Effect of Iron Salt upon the Treatment Efficiency ofIndustrial Monosodium Glutamate Wastewaterby Biochemistry Process

Effect of agent dosage on sludge dewaterability by biological conditioning