Abstract:Low-altitude unmanned aerial vehicle (UAV) photogrammetry combined with structure-from-motion (SFM) algorithms is the latest technological approach to imaging 3D stereo constructions. At present, derivative products have been widely used in landslide monitoring, landscape evolution, glacier movement, volume measurement, and landscape change detection. However, there is still a lack of research into the accuracy of 3D data positioning based on the structure-from-motion of unmanned aerial vehicle (UAV-SFM) technology, itself, which can affect the measurable effectiveness of the results in further applications of this technological approach. In this paper, validation work was carried out for the DJI Phantom 4 RTK UAV, for earth observation data related to 3D positioning accuracy. First, a test plot with a relatively stable surface was selected for repeated flight imaging observations. Specifically, three repeated flights were performed on the test plot to obtain three sorties of images; the structure from motion and multi-view stereo (SFM-MVS) key technology was used to process and construct a 3D scene model, and based on this model the digital surface model (DSM) and digital orthophoto map (DOM) data of the same plot with repeated observations were obtained. In order to check the level of 3D measurement accuracy of the UAV technology itself, a window selection-based method was used to sample the point cloud set data from the three-sortie repeat observation 3D model. The DSM and DOM data obtained from three repeated flights over the surface invariant test plots were used to calculate the repeat observation 3D point errors, taking into account the general methodology of redundant observation error analysis for topographic surveys. At the same time, to further analyze the limits of the UAV measurement technique, possible under equivalent observation conditions with the same processing environment, a difference model (DOD) was constructed for the DSM data from three sorties, to deepen the overall characterization of the differences between the DSMs obtained from repeated observations. The results of the experimental study concluded that both the analysis of the 3D point set measurements based on window sampling and the accuracy evaluation using the difference model were generally able to achieve a centimeter level of planimetric accuracy and vertical accuracy. In addition, the accuracy of the surface-stabilized hardened ground was better, overall, than the accuracy of the non-hardened ground. The results of this paper not only probe the measurement limits of this type of UAV, but also provide a quantitative reference for the accurate control and setting of an acquisition scheme of the UAV-based SfM-MVS method for geomorphological data acquisition and 3D reconstruction.

The Study of UAS Technology for Environment Supervision in Railway Construction

The status and prospect of UAV remote sensing in mine monitoring and land reclamation

Rapid Construction of Mine Line Infrastructure Using Low-altitude Unmanned Aerial Vehicle Photogrammetry

Monitoring Abandoned Dreg Fields of High-Speed Railway Construction with Uav Remote Sensing Technology

Application of Computer UAV Remote Sensing Technology in Building Engineering Surveying and Mapping

Using High-Resolution Imagery Acquired with an Autonomous Unmanned Aerial Vehicle for Urban Construction and Planning

Application Research of Unmanned Aerial Vehicle Remote Sensing Technology in Agricultural Pest and Disease Monitoring

Application of Low-cost Unmanned Aerial Vehicle in 3D Modelling of Large Scale Geotechnical Engineering:Case Study of High Filling Engineering of Airport in Mountain Area of Southwest China

Survey of Built Environment in the Era of UAV: from Aerial Photogrammetry to Point Cloud Classification

Study on the Key Technology and Application of UAV Surveying and Mapping Data Processing

Exploration of the Application of UAV Remote Sensing Technology in Engineering Surveying and Mapping

Experimental Study on 3D Measurement Accuracy Detection of Low Altitude UAV for Repeated Observation of an Invariant Surface

RESEARCH AND APPLICATION OF LIDAR TECHNOLOGY IN CADASTRAL SURVEYING AND MAPPING

Unmanned aerial vehicle based remote sensing method for monitoring a steep mountainous slope in the Three Gorges Reservoir, China

Application of UAV aerial surveying technology in the investigation of geological disaster on Qinghai-Tibetan Plateau

Application of unmanned airship image system and processing techniques for identifying of fresh water wetlands at a community scale

The application of unmanned aircraft vehicle (UAV) to monitor construction area changes

Study on terrain acquisition and processing technology of BDS-3 auxiliary mountain highway

The Analyses for the Experiments of High-Resolution Digital Aero-Photograph with UAV Remote-Sensing System

Surveying and Mapping of Large-scale Topographic Map Based on UAV Image-free Control Point Technology

Iterative construction of low-altitude UAV air route network in urban areas: Case planning and assessment