Abstract:Long-term and high-intensity coal mining has led to the increasingly serious surface subsidence and environmental problems. Surface subsidence monitoring plays an important role in protecting the ecological environment of the mining area and the sustainable development of modern coal mines. The development of surveying technology has promoted the acquisition of high-resolution terrain data. The combination of an unmanned aerial vehicle (UAV) point cloud and the structure from motion (SfM) method has shown the potential of collecting multi-temporal high-resolution terrain data in complex or inaccessible environments. The difference of the DEM (DoD) is the main method to obtain the surface subsidence in mining areas. However, the obtained digital elevation model (DEM) needs to interpolate the point cloud into the grid, and this process may introduce errors in complex natural topographic environments. Therefore, a complete three-dimensional change analysis is required to quantify the surface change in complex natural terrain. In this study, we propose a quantitative analysis method of ground subsidence based on three-dimensional point cloud. Firstly, the Monte Carlo simulation statistical analysis was adopted to indirectly evaluate the performance of direct georeferencing photogrammetric products. After that, the operation of co-registration was carried out to register the multi-temporal UAV dense matching point cloud. Finally, the model-to-model cloud comparison (M3C2) algorithm was used to quantify the surface change and reveal the spatio-temporal characteristics of surface subsidence. In order to evaluate the proposed method, four periods of multi-temporal UAV photogrammetric data and a period of airborne LiDAR point cloud data were collected in the Yangquan mining area, China, from 2020 to 2022. The 3D precision map of a sparse point cloud generated by Monte Carlo simulation shows that the average precision in X, Y and Z directions is 44.80 mm, 45.22 and 63.60 mm, respectively. The standard deviation range of the M3C2 distance calculated by multi-temporal data in the stable area is 0.13–0.19, indicating the consistency of multi-temporal photogrammetric data of UAV. Compared with DoD, the dynamic moving basin obtained by the M3C2 algorithm based on the 3D point cloud obtained more real surface deformation distribution. This method has high potential in monitoring terrain change in remote areas, and can provide a reference for monitoring similar objects such as landslides.

Unmanned aerial vehicle based remote sensing method for monitoring a steep mountainous slope in the Three Gorges Reservoir, China

High precision slope deformation monitoring by UAV with industrial photogrammetry

Rapid monitoring of reclaimed farmland effects in coal mining subsidence area using a multi-spectral UAV platform

DEM Establishing Method of Mining Subsidence in High Underground Water Mining Area with UAV

The status and prospect of UAV remote sensing in mine monitoring and land reclamation

Application of UAV 3D Point Cloud Data in Highway Slope Disaster Investigation

Detection and analysis of landslide geomorphology based on UAV vertical photogrammetry

Research on fine collection and interpretation methods of discontinuities on high-steep rock slopes based on UAV multi-angle nap-of-the-object photogrammetry

Application of UAV Digital Photogrammetry in Geological Investigation and Stability Evaluation of High-Steep Mine Rock Slope

Monitoring Mining Surface Subsidence with Multi-Temporal Three-Dimensional Unmanned Aerial Vehicle Point Cloud

Monitoring Abandoned Dreg Fields of High-Speed Railway Construction with Uav Remote Sensing Technology

Practical Application Of Unmanned Aerial Vehicles For Mountain Hazards Survey

Gully Erosion Mapping and Monitoring at Multiple Scales Based on Multi-Source Remote Sensing Data of the Sancha River Catchment, Northeast China

Multistep rocky slope stability analysis based on unmanned aerial vehicle photogrammetry

A photographic method to identify reservoir geohazards induced by rock mass deterioration of hydro-fluctuation belt

Test and Analysis of Vegetation Coverage in Open-Pit Phosphate Mining Area around Dianchi Lake Using UAV-VDVI

Application of UAV aerial surveying technology in the investigation of geological disaster on Qinghai-Tibetan Plateau

Rapid identification of landslide, collapse and crack based on low-altitude remote sensing image of UAV

3D Modelling and Measuring Dam System of a Pellucid Tufa Lake Using UAV Digital Photogrammetry

UAV Tilt Photography Control for Numerical Simulation of High and Steep Rock Slopes

Visual Slope Inspection using Unmanned Aerial Vehicle (UAV)