Selective separation of cadmium(II), copper(II) and nickel(II) ions from electroplating wastewater using dual flat sheet supported liquid membrane
Lai Yee Lee,Norhashimah Morad,Norli Ismail,Mohd Rafatullah
DOI: https://doi.org/10.5004/dwt.2021.27186
IF: 1.1
2021-01-01
Desalination and Water Treatment
Abstract:A dual flat sheet supported liquid membrane (DFSSLM) system was developed based on concurrent extraction, selective separation, and recovery of three metal ions from a mixture in a single process. DFSSLM was made up of a combination of two membranes and three compartments (feed, intermediate and strip) to selectively recover not just one but three types of metal ions at the end of the system. This research aims to study the efficiency of DFSSLM in the selective extraction of cadmium(II) and copper(II) over nickel(II) ions from an aqueous mixture and electroplating waste-water. The first membrane was impregnated with 100 mM di-(2-ethylhexyl)phosphoric acid and 50 mM tributyl phosphate in kerosene, whereas the second membrane was impregnated with 99.64 mM trioctylmethylammonium chloride and 50 mM tributyl phosphate in toluene. After continuous stirring (500 rpm) in all compartments for 48 h, 98.79% of nickel(II) was recovered from the synthetic mixture in feed, 91.32% of copper(II) in intermediate, and 91.04% of cadmium(II) in strip compartment. The flux changes and kinetic studies showed cadmium(II) was preferentially transported over copper(II). The membranes (polymer and extractants) were characterized by Fourier transform infrared spectroscopy and scanning electron microscopy with an energy-dispersive X-ray. In comparison with the treatment of real electroplating effluent, high output/input ratios were obtained for recovered cadmium(II), copper(II) and nickel(II). Most of the other heavy metals were eliminated together with the recovery of 89.09% of cadmium(II) in the strip, 90.87% of copper(II) in intermediate, and 97.61% of nickel(II) in the feed. This study concluded that DFSSLM is efficient for the separation and recovery of cadmium(II), copper(II) and nickel(II) from a complex mixture.
engineering, chemical,water resources