Abstract:Given its double functions of selective separation and concentration for ions, the potential of electrodialysis (ED) for the reclamation of waste acid has been widely recognized. In view of some differences from the cases of salt systems, a deep grasp on the effects of operating conditions on ED-based acid recovery is urgently required. Moreover, it is also challenging and desirable to effectively address the modelling issue of the membrane process. In this study, the influences of some typical operational factors, including current density, membrane selection, acid concentration of waste effluent, concentration differences between the dilute and concentrating compartments, on ED performances, such as its concentration evolution, current utilization and energy consumption, are systematically investigated. In particular, a fundamental model is established on the basis of the equations of Nernst-Planck, Navier-Stokes and Continuity to understand the influences of operating conditions and predict the relevant work performances. Therein, the proton diffusion coefficient of the used anion exchange membrane (AEM) can be regressed according to its practical performance and input. It is noticed that the obtained proton diffusion efficient is closely related to the AEM selection, but has almost nothing to do with the specific operational conditions and even the acid systems. A series of ED experiments show that the simulation results are in good agreement with the experimental results, which verifies the validity of the proposed model. Especially, this work confirms that proton leakage across AEMs should be the culprit in the non-ideal behaviors of ED-based acid recovery. Hopefully, the new model can contribute to the stack design, process optimization and scale-up of the ED-based acid recovery.

Research on the eIectricaI regeneration mechanisms of ion exchange resins

Synthesis and Characterization of an Amphoteric Resin for Use in Membrane-Free Electrodeionization

Study on the performance of EDI device in dealing with Ni2+solution with dilute departments filled with cation exchange resins

Desalination of water with high conductivity using membrane-free electrodeionization

Membrane-free electrodeionization without electrode polarity reversal for high purity water production

Membrane-free electrodeionization using strong-type resins for high purity water production

Amphoteric Blend Ion Exchange Resin with Medium-Strength Alkalinity for High-Purity Water Production in Membrane-Free Electrodeionization

Production of High Purity Water Using Membrane-Free Electrodeionization with Improved Resin Layer Structure

Membrane-free Electrodeionization Using Phosphonic Acid Resin for Nickel Containing Wastewater Purification

Novel Composite Anion Exchange Membranes Based on Quaternized Polyepichlorohydrin for Electromembrane Application

Ion Exchange Membranes for Electrodialysis: A Comprehensive Review of Recent Advances

Membrane-free Electrodeionization for Purification of Wastewater Containing Low Concentration of Nickel Ions

Water electro-transport with hydrated cations in electrodialysis

Perspective in ion exchange membranes

Membrane-free Electrodeionization for High-Velocity Production of High-Purity Water

Influence of Some Parameters on Membrane-Free Electrodeionization for the Purification of Wastewater Containing Nickel Ions

Electrically Regenerated Ion Exchange For Removal And Recovery Of Cr(Vi) From Wastewater

Factors Governing Mass Transfer During Membrane Electrodialysis Regeneration of LiCl Solution for Liquid Desiccant Dehumidification Systems

Effects of electrodialysis conditions on waste acid reclamation: Modelling and validation

Potential of Divalent Ion Recovery from Nanofiltration Concentrate Using Hybrid Ion Exchange Membrane Processes with Ettringite Mineral Transition: Separation Performance, Recovered Precipitates and Membrane Fouling

Advancing electrodialysis with dually cross-linked PVDF-based anion exchange membranes having semi-interpenetrating networks