Abstract:The reliability of computational fluid dynamics (CFD) codes is checked by comparing simulations with experimental data. A typical data set consists chiefly of velocity and temperature readings, both ideally having high spatial and temporal resolution to facilitate rigorous code validation. While high resolution velocity data is readily obtained through optical measurement techniques such as particle image velocimetry, it has proven difficult to obtain temperature data with similar resolution. Traditional sensors such as thermocouples cannot fill this role, but the recent development of distributed sensing based on Rayleigh scattering and swept-wave interferometry offers resolution suitable for CFD code validation work. Thousands of temperature measurements can be generated along a single thin optical fiber at hundreds of Hertz. Sensors function over large temperature ranges and within opaque fluids where optical techniques are unsuitable. But this type of sensor is sensitive to strain and humidity as well as temperature and so accuracy is affected by handling, vibration, and shifts in relative humidity. Such behavior is quite unlike traditional sensors and so unconventional installation and operating procedures are necessary to ensure accurate measurements. This paper demonstrates implementation of a Rayleigh scattering-type distributed temperature sensor in a thermal mixing experiment involving two air jets at 25 and 45 °C. We present criteria to guide selection of optical fiber for the sensor and describe installation setup for a jet mixing experiment. We illustrate sensor baselining, which links readings to an absolute temperature standard, and discuss practical issues such as errors due to flow-induced vibration. This material can aid those interested in temperature measurements having high data density and bandwidth for fluid dynamics experiments and similar applications. We highlight pitfalls specific to these sensors for consideration in experiment design and operation.

Distributed optical fiber temperature measurement system based on Raman scattering applied to building fire monitor

Research of Distributed Optical Fiber Temperature Measurement System Based on Raman Scattering Principle

Design of data acquisition system for distributed optical fiber sensor

Design and Implementation of Temperature Measurement System Based on Distributed Fiber Grating Sensor

Performance evaluation of Raman scattering-based distributed optical fiber temperature sensing system in cryogenic environment

Raman Distributed Temperature Sensor with Optical Dynamic Difference Compensation and Visual Localization Technology for Tunnel Fire Detection

Distributed Optical Fiber Sensing Measurement Based on Time Offset

Fiber temperature sensor based on rare earth fluorescence material

Fiber Raman Distributed Temperature Sensor Based on the Light Source with Adjustable Pulsewidth

Evaluation of Fiber Optic Raman Scattering Distributed Temperature Sensor Between –196 and 400 °C

Distributed fiber optic temperature sensor based on dynamic calibration of Raman Stokes backscattering light intensity

A hybrid distributed optical fibre sensor for acoustic and temperature fields reconstruction

High-Resolution Distributed Optical-Fiber Sensing Techology Based on Direct-Detecting Coherent Optical Time-Domain Reflectometer

Distributed Temperature and Curvature Sensing Based on Raman Scattering in Few-Mode Fiber

A Spatially Distributed Fiber-Optic Temperature Sensor for Applications in the Steel Industry

Physics and applications of Raman distributed optical fiber sensing

Recent Progress in Distributed Fiber Optic Sensors

24 km High-Performance Raman Distributed Temperature Sensing Using Low Water Peak Fiber and Optimized Denoising Neural Network

A Photon-Counting Optical Time-Domain Reflectometry Based Optical Fiber Temperature Sensor System

Fiber Optic Distributed Sensors for High-resolution Temperature Field Mapping