Abstract:The high-temperature zone of a laboratory staged swirl gas turbine combustor was studied under different Stratification Ratios (SR) based on experimentally validated Large Eddy Simulation (LES). CH 4 /air mixtures were adopted with a constant global equivalence ratio of 0.5. Three flame conditions with SR = 1, 2 and 3 were chosen for Particle Image Velocimetry (PIV) and OH Planar Laser-Induced Fluorescence (OH-PLIF) measurements. The LES was performed with the Flamelet-Generated Manifold (FGM) combustion model and validated against the experimental velocity fields and flame structures. Then, a detailed analysis of the formation, evolution, and dissipation of the high-temperature zone was conducted. It is observed that a larger SR deteriorates the uniformity of the exit temperature distribution. One major reason is that with increased SR, rich-burn region is observed to be more dominant. This leads to enhanced non-premixed combustion and an extended heat release region towards downstream, which intensively contribute to the high-temperature zone formation. Additionally, vortices along the shear layers are found to enhance the mixing between fluids of different temperatures, which plays a crucial role in dissipating the high-temperature zone. Higher SR leads to a larger Primary Recirculation Zone (PRZ), and the partially dissipated high-temperature fluid can be recirculated into the PRZ, thus increasing the dissipation distance. With lower SR, however, the high-temperature parcels can be broken and even completely dissipated. This accounts for lower temperature gradients and a more uniform exit temperature distribution. The findings from this study offer new perspectives on understanding the effect of temperature in the primary combustion zone on the exit temperature distribution.

Numerical Analysis for Performance of High Temperature Rise Swirl Combustors

Experimental and Numerical Study of a Two-Stage Swirl Burner

Numerical and Experimental Investigation of a Non-Premixed Double Swirl Combustor

Numerical Simulation of Effects of Venturi Tube Throat Diameter on Flow Field of Combustor

Large Eddy Simulations of Turbulent Combustion of Kerosene-Air in a Dual Swirl Gas Turbine Model Combustor at High Pressures

Direct Numerical Simulations and Analysis of Three-Dimensional N-Heptane Spray Flames in a Model Swirl Combustor

Experimental and Numerical Investigation of the Non-Reacting Flow in a High-Fidelity Heavy-Duty Gas Turbine DLN Combustor

Computational Study of the Effect of Dual Air Swirling Injection on Turbulent Combustion of Kerosene–Air at a High Pressure

Numerical investigation of inlet guiding ring effect on combustor flow field with multiple swirler structures

Numerical Simulation and Flame Characteristics Analysis of Non-Premixed Swirling Combustion

Numerical Study on the Flow Field of a Combustor with Triple Swirlers

Numerical analysis on hydrogen swirl combustion and flow characteristics of a micro gas turbine combustor with axial air/fuel staged technology

Simulation study on the flow characteristic and combustion performance in a high-temperature rise combustor based on RQL under different length of quench zone

Investigation on unsteady formation and evolution of high-temperature zone in a staged swirl combustor

The effects of swirl number on the combustion characteristics in an internally-staged combustor

Design and Numerical Simulation of a Micro-Gas Turbine Combustor

Emission Characteristics And Axial Flame Temperature Distribution Of A Circumferential Reverse Flow Combustor

Numerical Simulation of the Combustion Characteristics of a Low NOx Swirl Burner: Influence of the Primary Air Pipe

Improving Blowout Performance of the Conical Swirler Combustor by Employing Two Parts of Fuel at Low Operating Condition

Numerical Simulation of Oxy-coal Combustion for a Swirl Burner with EDC Model

Numerical Investigation on Performance of Axisymmetric Variable Geometry Scramjet Combustor Equipped with Strut Flame Holder