Abstract:Compressible flow past a circular cylinder at an inflow Reynolds number of 2 x 10 5 is numerically investigated by using a constrained large-eddy simulation (CLES) technique. Numerical simulation with adiabatic wall boundary condition and at a free-stream Mach number of 0.75 is conducted to validate and verify the performance of the present CLES method in predicting separated flows. Some typical and characteristic physical quantities, such as the drag coefficient, the root-mean-square lift fluctuations, the Strouhal number, the pressure and skin friction distributions around the cylinder, etc. are calculated and compared with previously reported experimental data, finer-grid large-eddy simulation (LES) data and those obtained in the present LES and detached-eddy simulation (DES) on coarse grids. It turns out that CLES is superior to DES in predicting such separated flow and that CLES can mimic the intricate shock wave dynamics quite well. Then, the effects of Mach number on the flow patterns and parameters such as the pressure, skin friction and drag coefficients, and the cylinder surface temperature are studied, with Mach number varying from 0.1 to 0.95. Non-monotonic behaviors of the pressure and skin friction distributions are observed with increasing Mach number and the minimum mean separation angle occurs at a subcritical Mach number of between 0.3 and 0.5. Additionally, the wall temperature effects on the thermodynamic and aerodynamic quantities are explored in a series of simulations using isothermal wall boundary conditions at three different wall temperatures. It is found that the flow separates earlier from the cylinder surface with a longer recirculation length in the wake and a higher pressure coefficient at the rear stagnation point for higher wall temperature. Moreover, the influences of different thermal wall boundary conditions on the flow field are gradually magnified from the front stagnation point to the rear stagnation point. Moreover, the influences of different thermal wall boundary conditions on the flow field are graduallymagnified from the front stagnation point to the rear stagnation point. It is inferred that the CLES approach in its current version is a useful and effective tool for simulating wall-bounded compressible turbulent flows with massive separations.

Comparison of detached eddy simulation schemes on a subcritical flow around circular cylinder

Constrained Large-Eddy Simulation of Compressible Flow Past a Circular Cylinder

Constrained Large-Eddy Simulation and Detached Eddy Simulation of Flow Past a Commercial Aircraft at 14 Degrees Angle of Attack

Large-Eddy and Detached-Eddy Simulations of the Separated Flow Around a Circular Cylinder

Numerical Simulation of Three-Dimensional Vortex Dynamics in Wake of A Circular Cylinder

IDDES Method Based on Differential Reynolds-stress Model and Its Application in Bluff Body Turbulent Flows

Comparisons of Three Improved DES Methods on Unsteady Flows Past Tandem Cylinders

Three-dimensional Numerical Simulation on Flow Past Three Circular Cylinders in an Equilateral-Triangular Arrangement

Simulations of Complex Turbulent Flows with RANS-LES Hybrid Approaches

Numerical investigation of turbulent flow and mixed convection around a wavy cylinder

A Comparative Study of DES Type Methods for Mild Flow Separation Prediction on a NACA0015 Airfoil

Numerical Dissipation Effects on Detached Eddy Simulation of Turbomachinery Flows

Hybrid turbulence models for flows around a stationary smooth circular cylinder

Numerical Study on the Vortex Motion Patterns Around a Rotating Circular Cylinder and Their Critical Characters

Three-Dimensional Flow Around Two Tandem Circular Cylinders with Various Spacing at Re=220

The Influence of Advection Schemes and Turbulence Closure Models on Drag Coefficient Calculation Around a Circular Cylinder at High Reynolds Number

Numerical Investigation of Massively Separated Flows Past RLG Using Advanced DES Approaches

New Insight on Large-Eddy Simulation of Flow Past a Circular Cylinder at Subcritical Reynolds Number 3900

Numerical Study of Supersonic Cavity Flows with Different Turbulent Models

Evaluation of Numerical Dissipation Sensitivity Using IDDES

Numerical study on the supersonic near-wake flow structures of a cylinder at an angle of attack