Abstract:In order to enhance the compatibilization and interfacial adhesion between epoxy and liquid carboxyl-terminated butadiene acrylonitrile (CTBN) rubber, an initiator was introduced into the mixture and heated to initiate the cross-linking reaction of CTBN. After the addition of curing agents, the CTBN/epoxy blends with a localized interpenetrating network structure were prepared. The mechanical properties and morphologies of pre-crosslinked and non-crosslinked CTBN/epoxy blends were investigated. The results show that the tensile strength, elongation at break and impact strength of pre-crosslinked CTBN/epoxy blends are significantly higher than those of non-crosslinked CTBN/epoxy blends, which is primarily due to the enhanced interfacial strength caused by the chemical bond between the two phases and the localized interpenetrating network structure. Both pre-crosslinked and non-crosslinked CTBN/epoxy blends show a bimodal distribution of micron- and nano-sized rubber particles. However, pre-crosslinked CTBN/epoxy blends have smaller micron-sized rubber particles and larger nano-sized rubber particles than non-crosslinked CTBN/epoxy blends. The dynamic mechanical analysis shows that the storage modulus of pre-crosslinked CTBN/epoxy blends is higher than that of non-crosslinked CTBN/epoxy blends. The glass transition temperature of the CTBN phase in pre-crosslinked CTBN/epoxy blends increases slightly compared with the CTBN/epoxy system. The pre-crosslinking of rubber is a promising method for compatibilization and controlling the morphology of rubber-modified epoxy materials.

Curing Process and Properties of BCE/CTBN Blends

Curing, Thermal Stability and Composite Properties for Blends of the Novel Bismaleimide and Cyanate Containing Naphthalene

Cure of Neat Resins and Properties of Composites for Interpenetrating Polymer Networks from the Novel Bismaleimide and Cyanate Containing Naphthalene

Study on Curing Kinetics and Thermal Properties of Bismaleimide Resin Containing Ether Linkage

The Curing Behavior and Properties of Diglycidyl Ether of 4,4′-Bis(4-hydroxybenzoyloxy)-3,3′,5,5′-tetramethylbiphenyl and Its Composites with Multi-Wall Carbon Nanotubes

CYANATE ESTERS MODIFIED BY CARBOXYL-TERMINATED LIQUID BUTADIENE-ACRYLONITRILE

STUDY ON DGE-BHBTMBP/E-51/DDS CURED

Curing behaviors and performance of a carboxyl-terminated butadiene acrylonitrile rubber/bisphthalonitrile resin system

Toughening of bisphenol A and carboxyl-terminated butadiene-acrylonitrile to epoxy resin

Modification of Bisphenol A Dicyanate Ester by Carboxyl‐terminated Liquid Butadiene‐acrylonitrile and Its Composites

Mechanical and thermal properties of bisphenol A-based cyanate ester and diallyl phthalate blends

Toughening Of Epoxy Resin Using Reactive Liquid (Ctbn) Rubber

Effect of Ctbn Concentration on Thermal and Morphological Properties of Binary Copolymers of O-Cresol Novolac Epoxy Resin and Bismaleimide

Thermal and Mechanical Evaluation of Cyanate Ester Resin Modified with Bismaleimide and Diallyl Phthalate

Reactive Mechanism and Curing Kinetics of BMI/BCE Resin

Mechanical and Dielectric Properties of Blends of Dicyanate Ester and Bisphenol A-Based Benzoxazine

Properties of epoxy terminated butadiene-acrylonitrile rubber modified cynate esters resin

Curing kinetics of pre-crosslinked carboxyl-terminated butadiene acrylonitrile (CTBN) modified epoxy blends

Mechanical Properties and Morphologies of Carboxyl-Terminated Butadiene Acrylonitrile Liquid Rubber/Epoxy Blends Compatibilized by Pre-Crosslinking

Study on Cyanate Resin Modified by Prepolymer of Bismaleimide

Curing kinetics and mechanical properties of cyanate ester/hyperbranched benzoxazine copolymers