Abstract:In this study, a novel modeling method for a dual-rotor-bearing-casing system is proposed based on the finite element method (FEM) and the model reduction method. The dual-rotor system is modeled using Timoshenko beam and rigid disc elements, while the casing is modeled using shell elements. To reduce the number of degrees of freedom (DOFs), the modified Craig-Bampton method is used to downscale the finite element model of the casing. In addition, the Hertzian contact force and the DOFs of the bearing outer race and pedestal are considered in the bearing model. Through a specific assembly method, a dynamic model of the dual-rotor-bearing-casing is established at the expense of slight increase in the number of DOFs. Based on this dynamic model with fewer DOFs, the effects of two disc imbalances and the rub-impact fault between the low-pressure (LP) turbine and casing are then introduced as an application of the proposed model. The calculation results indicate that the critical speeds of each order of the whole aero-engine model are significantly lower than those of the casing-free model. In the amplitude-frequency diagram, the peak of the critical speed of the whole aero-engine model is found to appear earlier, and the extent of rightward bending is larger. The study also includes parametric analysis to examine the effects of parameters such as the coefficient of friction, the casing-disc contact stiffness, and the casing-foundation connection stiffness. After introducing the nonlinear bearing model, a large number of fractional frequency components are found in the frequency-domain diagram, the dynamic characteristics of the model become more complicated. The coupled bending-torsional effect has also been studied in detail, the calculation results show that it is reasonable to ignore the torsional deformation.

Modeling method and reduction of dual-rotor system with complicated structures

Discrete Dynamical Model for the Dual-Rotor Systems with Six Supports of the Aero-Engine

Comparative study of two order reduction methods for high-dimensional rotor systems

Application of the Second Dimension Reduction Method in Nonlinear Rotor Dynamic System

Nonlinear Dynamical Behaviors of a Complicated Dual-Rotor Aero-Engine with Rub-Impact

Reduced-Order Modeling For Stability And Steady-State Response Analysis Of Asymmetric Rotor Using Three-Dimensional Finite Element Model

A High-Performance Structural Aircraft: Modeling And Control

Dynamical Modeling and Dynamic Characteristics Analysis of a Coaxial Dual-Rotor System

Topological Structures of Vibration Responses for Dual-Rotor Aeroengine

Nonlinear Dynamic Behavior Analysis of Dual-Rotor-Bearing Systems with Looseness and Rub–Impact Faults

Dynamic characteristics analysis of a dual-rotor system with inter-shaft bearing

Similitude for the Dynamic Characteristics of Dual-Rotor System with Bolted Joints

Nonlinear dynamic analysis of a complex dual rotor-bearing system based on a novel model reduction method

Aerodynamic Layout Design and Internet of Things Control Simulation of Micro-Sized Coaxial Twin-Rotor Flight System

Iterative Dynamic Condensation Method of Finite Element Model for Rotor-Bearing System

Applications of the TPOD Method in the High-Dimensional Rotor System Models with Common Faults

Nonlinear dynamic behavior of a dual-rotor bearing system with coupling misalignment and rubbing faults

Numerical analysis of a synchronous dual-rotor's steady-state response

Modeling strategy and dynamic analysis of a dual-rotor-bearing-casing system in aero-engine

Investigation of the Dynamic Characteristics of a Dual Rotor System and Its Start-Up Simulation Based on Finite Element Method

A Developed Component Mode Synthesis for Parametric Response Analysis of Large-Scale Asymmetric Rotor