Abstract:The modeling of stator and rotor faults is the basis of the development of online monitoring techniques. To obtain reliable stator and rotor fault models, this paper focuses on dynamic modeling of the stator and rotor faults in real-time, which adopts a multiple-coupled-circuit method by using a winding function approach for inductance calculation. Firstly, the model of the induction machine with a healthy cage is introduced, where a rotor mesh that consists of a few rotor loops and an end ring loop is considered. Then, the stator inter-turn fault model is presented by adding an extra branch with short circuit resistance on the fault part of a stator phase winding. The broken rotor bar fault is then detailed by merging and removing the broken-bar-related loops. Finally, the discrete models under healthy and faulty conditions are developed by using the Tustin transformation for digital implementation. Moreover, the stator and rotor mutual inductances are derived as a function of the rotor position according to the turn and winding functions distribution. Simulations and experiments are performed on a 2.2-kW/380-V/50-Hz three-phase and four-pole induction motor to show the performance of the stator and rotor faults, where the saturation effect is considered in simulations by exploiting the measurements of a no load test. The simulation results are in close agreement with the experimental results. Furthermore, magnitudes of the characteristic frequencies of 2f1 in torque and (1 ± 2s)f1 in current are analyzed to evaluate the stator and rotor fault severity. Both indicate that the stator fault severity is related to the short circuit resistance. Further, the number of shorted turns and the number of continuous broken bars determines the rotor fault severity.

Applications of the TPOD Method in the High-Dimensional Rotor System Models with Common Faults

Model reduction applied to square to rectangular martensitic transformations using proper orthogonal decomposition

Flow Reconstructions and Aerodynamic Shape Optimization of Turbomachinery Blades by POD-based Hybrid Models

Modeling and Evaluation of Stator and Rotor Faults for Induction Motors

Research on Vibration Response of a Multi-Faulted Rotor System Using LMD-based Time-Frequency Representation

Modeling a Two-Span Rotor System Based on the Hamilton Principle and Rotor Dynamic Behavior Analysis

Rotor Faults Diagnosis in Rotor Field Oriented Controlled Induction Motors Based on Torque Current

Proper Orthogonal Decomposition In The Generation Of Reduced Order Models For Interconnects

Harmonic Model and Remedy Strategy of Multiphase PM Motor under Open-Circuit Fault

Improved High Resolution Estimation Approach for Rotor Fault Diagnosis

Study of Helicopter Optimal Autorotation Landing Procedure in Tail Rotor Drive Failure.

Control of Dual Three-Phase Permanent Magnet Synchronous Motor under Open Phase Fault Conditions

Reliability Topology Optimization of Collaborative Design for Complex Products under Uncertainties Based on the TLBO Algorithm

Adaptive Matrix Pencil Method for Mixed Rotor Faults Diagnosis

Fault Identification of Rotor Machine Based on Optimized Method

Modeling and simulation analysis of dual-rotor vibration system with multiple faults

Dynamic Model and Fault Feature Research of Dual-Rotor System with Bearing Pedestal Looseness

Application of high-dimensional dynamic system in rotor stability analysis

Research on the Rotor Fault Diagnosis Method Based on QPSO-VMD-PCA-SVM

A time-varying comprehensive dynamic model for the rotor system with multiple bearing faults

Reduced-Order Modeling in Rotordynamics and Its Robustness to Random Matrix Perturbation