Abstract:In recent years, tail rotor failure has been a significant factor in helicopter accidents, contributing to around 30% of all incidents. Among these failures, tail rotor pitch lockup accounts for nearly 2/3. However, there is currently a lack of research on the landing trajectory and control optimization for piloted helicopters facing tail rotor pitch lockup. Therefore, this paper aims to study the landing trajectory and pilot control strategy optimization during helicopter tail rotor pitch lockup. The findings of this research are expected to provide valuable insights and serve as a reference for subsequent real-time pilot-in-the-loop simulations and final flight tests. In this paper, we utilize the UH-60A helicopter as a prototype to establish a flight dynamics model and a pilot model. The aerodynamic forces and induced velocity of the main rotor are calculated using the blade element method and Pitt-Peters model. The rotor flap motion is simplified to a first-order harmonic quantity. We then formulate the problem of safe landing and control optimization as a nonlinear optimal control problem, with the cost function designed to reflect safety and feasibility during the flight and touchdown process. To solve the optimal control problem numerically, we use direct multiple shooting and sequential quadratic programming algorithms. Flight test data for the UH-60A, encompassing steady-state flight, dynamic response, and autorotation landing, are utilized to validate the accuracy of the flight dynamics model and the effectiveness of the optimal control algorithm. Finally, the paper investigates the safe landing trajectories and control strategies for the sample helicopter when encountering high tail rotor pitch lockup and low tail rotor pitch lockup, respectively. Simulation results demonstrate that when the tail rotor is stuck at a high pitch, it is advisable for pilots to execute a high-power state landing by maintaining the engine at high power while reducing forward speed and descent rate. Conversely, when the tail rotor is stuck at a low pitch, flying at an economical speed (in a low-power state) is advantageous, but it does not facilitate a safe landing thereafter. If the pilot attempts a conventional landing, the yaw rate at touchdown would be very high and potentially dangerous. In contrast, if an autorotation landing is executed, the landing will be safer with a much lower yaw rate at touchdown. The optimal landing trajectory and control process align with the recommendations from actual helicopter flight tests. The proposed method provides feasible pilot control strategies for safe landing when helicopters encounter various tail rotor pitch lockup situations. This research can serve as a reference for pilots before conducting actual flight tests.

Study of Helicopter Optimal Autorotation Landing Procedure in Tail Rotor Drive Failure.

Optimal Landing of Tilt-rotor Aircraft after Engine Failure Considering Pilot Inherent Limitations.

Landing Trajectory and Control Optimization for Helicopter Encountering Different Tail Rotor Pitch Lockups

Helicopter Safe Landing Trajectory after Main Rotor Actuator Failures

Rotor Cross-Tilt Optimization of Manned Multi-rotor Evtol Aircraft for Yaw Control Efficiency

Helicopter Autorotation Trajectory Planning Method Using Functional Tensor-Train-Based Dynamic Programming Algorithms

Path Planning and Controlled Crash Landing of a Quadcopter in case of a Rotor Failure

Automated Design Optimization of a Mono Tiltrotor in Hovering and Cruising States

Research on Pilot Control Strategy and Workload for Tilt-Rotor Aircraft Conversion Procedure

A Vortex-Ring-state-avoiding Descending Control Strategy for Multi-Rotor UAVs

Fault‐tolerant attitude tracking control of tandem rotor helicopter considering internal actuator saturation and external wind gust

Dynamic Modeling and Control for Tilt-Rotor UAV Based on 3D Flow Field Transient CFD

Rotor cross-tilt optimization for yaw control improvement of multi-rotor eVTOL aircraft

Fixed-Time Fault-Tolerant Adaptive Neural Network Control for a Twin-Rotor UAV System with Sensor Faults and Disturbances

Research on Anti-Rollover Adaptive Landing Gear Technology Based on Impedance Control

Takeoff optimisation of coaxial compound helicopter with uncertainty quantification

LQR-based Ground Resonance Suppression of Helicopter with Adaptive Landing Gear

A New Algorithm on Automatic Trimming for Helicopter Rotor Aerodynamic Loads

A Physics-Based Methodology to Improve the Mitigation of Loss of Tail Rotor Effectiveness

Trajectory Planning for Emergency Landing of VTOL Fixed-Wing Unmanned Aerial Vehicles

Flight Dynamics Modeling and Dynamic Stability Analysis of Tilt-Rotor Aircraft