Abstract:The instantaneous rotational speed (IRS) of a rotating machine is key information to understand the machine operation and diagnose the potential faults. A novel nonprojection fringe vision-based system was proposed to realize the measurement of IRS, which was simply composed of an artificial linearly varying-density fringe pattern (LVD-FP) as a sensor and a high-speed camera as a detector. The designed LVD-FP, printed by a normal printer, was pasted around the surface of the rotary shaft completely along the fringe density change direction. Part of the LVD-FP was captured by the high-speed camera. The fringe period density of each imaged LVD-FP intensity changed due to the rotation of the shaft, from which the rotational angle could be obtained. Subsequently, both the instantaneous angular speed (IAS) between two adjacent frames and the IRS could be accurately and efficiently obtained. The influences of the key parameters of the proposed system on the measurement accuracy were investigated by simulations and experiments. Both the simulation and experimental results demonstrated that the proposed system can accurately measure the IAS and correctly track the wide range IRS with the advantage of noncontact and cost effective. In addition, the rotation direction of the shaft could be directly obtained from the sign of the IRS curves. Therefore, the proposed system could provide a novel vision-based approach for IRS measurement, especially when the conventional speed sensor cannot be installed on the rotary shaft. The good performance of the system in IRS measurement makes it attractive for fault diagnosis of rotating machinery.

Quadrant Detecting Technology and Its Application to Rotor Speed and Direction

Analyzing characteristic of the four-quadrant detector applied to laser alignment

Research on high-speed and non-contact angle detection based on laser measurement

A quadrant detector based laser alignment method with higher sensitivity

Study on Background Light Influences on Four-quadrant Detector

Measurement Method of the Roll Angle

Induction Motor Rotor Fault Diagnosis Method Based on Double PQ Transformation

Study of Rotation Axis Measurement System Based on PSD

Research and Application on Optic-electronic Ranging Technology for Close Quarters

Research Based on QPD Single-lens Micro-angle Measurement System and Its Key Technology

Rotor Broken Bar Fault Diagnosis for Induction Motors Based on Double PQ Transformation

Instantaneous Rotational Speed Measurement Using Image Correlation and Periodicity Determination Algorithms.

Rotor Faults Diagnosis in Rotor Field Oriented Controlled Induction Motors Based on Torque Current

PQ Transformation and Rotor Fault Diagnosis for Large Induction Motors

An accurate ultrasonic wind speed and direction measuring method by combining time-difference and phase-difference measurement using coded pulses combination

Research on Digital Estimation Method of Motor Speed and Rotor Position

Embedded displacement measuring device based on error separating technique of multi-circle overlapping three-probe method

Quantitative Broken Rotor Bar Fault Detection for Closed-Loop Controlled Induction Motors

A novel rotation detection method based on the capacitance principle and triboelectric effect

Measurement of Instantaneous Rotational Speed Using Double Sine-Varying-density Fringe Pattern

A Capacitive Rotary Encoder Based on Quadrature Modulation and Demodulation