Abstract:The self-pressurization process of cryogenic propellant storage under a normal gravity condition often involves turbulent mixing in the liquid region and complex flow fields in the vapor region caused by heat leak into a cryogenic tank. Over time, the cryogenic tank pressurizes due to a temperature increase in the vapor phase and the heat and mass transfer across the liquid-vapor interface. A nodal simulation approach was employed to study the long term transients of tank self-pressurization. In this paper, mechanistic models and correlations were implemented to simulate the self-pressurization of Multipurpose Hydrogen Test Bed experiments with a commercial nodal code, namely, Systems Improved Numerical Differencing Analyzer with Fluid Integrator (SINDA/FLUINT). A lump number sensitivity study on the prediction of tank pressure and temperature was performed to determine the number of lumps appropriate for a 50% initial liquid fill level. Uniform heat flux boundary conditions were implemented on both phases during the tank self-pressurization with an estimated heat leak provided by NASA. Numerical simulation showed that the predicted pressure profiles of the 50% and 90% fill level cases agreed well with experimental data. In the liquid region, temperatures were primarily uniform and close to saturation due to turbulent natural convection mixing. Findings show the current model overestimates the temperature profiles in the vapor region when assuming heat conduction transfer.

Simulation Research on Gas Injection Circulation Precooling to Cryogenic Launch Vehicle Propulsion System with AMESim

Simulation Test of Natural Circulation Precooling for Cryogenic Pump System

AMESim-based Study on Natural Circulation Precooling for Launch Vehicle Propulsion System

Experimental study of self-pressurizing transfer system for cryogenic liquid

Influence Of Pressurization On Cooling-Down Process With A Gas-Phase Inlet Natural Circulation For A Cryogenic Pump System

Research Characteristics of Liquid Hydrogen Gravitational Flow Precooling System in Cryogenic Rocket

Study on Flow and Heat Transfer Characteristics of Cryogenic Tank with Gas Injection Circulation Precooling Backflow

Investigation on Natural Circulation Precooling for Cryogenic Liquid Rocket Engine

Numerical analysis of pre-cooling and priming transients in cryogenic propellant feed systems

Supercritical Heat Transfer of Cryogenic-Propellant Methane in Rectangular Engine Cooling Channels

Simulation of heat transfer and mass transfer in cryogenic propellant tank pressurization process

Natural Circulation Precooling Experiment of Cryogenic Pump System

Review on the models and numerical methods for simulation of precooling and starting process of LOX/LH; rocket engine

Numerical simulation on unsteady process in chilldown of cryogenic propellant transfer system

Numerical Investigation of Pressurization Performance in Cryogenic Tank of New-Style Launch Vehicle

Research of Single-Feeding Recirculation in Cryogenic Propellant Transfer System

Performance of Circulation Precooling Loop for Liquid Rocket Engine with Different Return Flow Locations

Experimental Study on Natural Circulation Precooling of Cryogenic Pump System with Gas Phase Inlet Reflux Configuration

Modeling and Simulation of Cryogenic Propellant Tank Pressurization in Normal Gravity

Experimental investigation of dual-feed recirculation in cryogenic propellant transfer system

Numerical studies on natural circulation precooling loop of cryogenic liquid rocket engine