Abstract:Selective electron beam melting (SEBM) is one of the most promising powder-based metal additive manufacturing (AM) technologies. However, controlling the SEBM process parameters in such a way as to maximize the quality of the fabricated components represents a significant challenge. Accordingly, taking Ti6Al4V titanium alloy for illustration purposes, the present study constructs a novel multi-scale modeling framework to examine the effects of three SEBM process parameters (namely the beam current, the beam diameter, and the scanning speed) on the dimensions and temperature distribution of the melt pool. In microscale, an effective model considering the interactions between the electron beam and the Ti6Al4V atoms was constructed based on the Monte Carlo ray-tracing simulations, and the electron beam total absorption of Ti6Al4V material as a function of incidence angle was obtained. In mesoscopic level, in order to take the absorption property of the porous structure of the powder layer into account, absorptivity profile along the depth of the powder bed was calculated by utilizing the absorptivity of Ti6Al4V for various incidence angles and the 3-D powder bed model. It is found that the total laser absorptivity of the Ti6Al4V powder bed is around 12% higher than that of the bulk material of Ti6Al4V due to the multiple reflection of electron beam inside the powder layer. Finally, three-dimensional finite element heat transfer simulations are performed using the proposed volumetric heat source to predict the melt pool geometry and thermal distribution during the SEBM process. It is shown that the simulation results are in good agreements with the experimental results reported in the literature.

Selective Electron Beam Melting Technique and Its Application

Current Status of Electron Beam Selective Melting Additive Manufacturing Technology

Additive manufacturing of metallic components by selective electron beam melting — a review

Dual-Material Electron Beam Selective Melting: Hardware Development and Validation Studies

Modeling and Experimental Validation of the Electron Beam Selective Melting Process

The Development of Electron Beam and Laser Hybrid Selective Melting Equipment

Processing of High‐Carbon Steel by Selective Electron Beam Melting

Study on the Fabrication Process of 316L Stainless Steel via Electron Beam Selective Melting

Research Progress of Multi-Scale Multi-Physics Modeling for Selective Melting Process

Technology Research of Direct Metal Forming Based on Electron Beam

Direct Metal Part Forming of 316L Stainless Steel Powder by Electron Beam Selective Melting

Electron Beam Selective Melting of 316L Stainless Steel Powder

Multi-scale modeling of selective electron beam melting of Ti6Al4V titanium alloy

Metal Fabrication by Additive Manufacturing Using Laser and Electron Beam Melting Technologies

Photopolymerization of Stainless Steel 420 Metal Suspension: Printing System and Process Development of Additive Manufacturing Technology toward High-Volume Production

The Development Status of Selective Laser Melting Technology (SLM)

Scanning Method of Filling Lines in Electron Beam Selective Melting

Research Status of Numerical Simulation of Selective Laser Melting Process at Home and Abroad

Scanning system development and digital beam control method for electron beam selective melting

Additive Manufacturing of Titanium Alloys by Electron Beam Melting: A Review