Influence of Die Parameters on the Deformation Inhomogeneity of Transitional Region During Local Loading Forming of Ti-alloy Rib-Web Component
Pengfei Gao,Xiaodi Li,He Yang,Xiaoguang Fan,Zhenni Lei
DOI: https://doi.org/10.1007/s00170-016-9443-1
IF: 3.563
2016-01-01
The International Journal of Advanced Manufacturing Technology
Abstract:The deformation inhomogeneity of transitional region plays a great role in both the macro and micro forming qualities in the local loading forming. In this work, the dependence of deformation inhomogeneity of transitional region on the die parameters in the local loading forming of Ti-alloy rib-web component was studied based on finite element (FE) simulation. To evaluate the deformation inhomogeneity, an area-weighted strain inhomogeneity index was employed, which is calculated through the user subroutine of FE software (DEFORM-2D). It is found that there exist two kinds of strain concentration areas contributing to the deformation inhomogeneity of transitional region. One kind is the almost symmetric strain concentration area at the non-partitioned ribs, which is essentially related to the filling of rib. Another kind is the slant strain concentration area at the partitioned rib, which is caused by the multi-step loading during local loading forming. Besides, the effects of die parameters on the deformation inhomogeneity of transitional region were studied by the combination of orthogonal experiment design and FE simulation. The results suggest that the draft angle of the right rib is the most significant factor for both the deformation inhomogeneities of the partitioned rib region and whole transitional region. And, these two deformation inhomogeneities both decrease with the draft angle of the right rib decreasing. Furthermore, the relationship between die parameters and deformation inhomogeneity of transitional region is developed using the response surface methodology (RSM). Based on the RSM model, the die parameters were optimized to improve the deformation homogeneity of transitional region. The results will provide basis for the design of die parameters to improving the deformation and microstructure homogeneities in the isothermal local loading forming of Ti-alloy rib-web component.