Abstract:Advances in Mechanical Engineering, Volume 16, Issue 4, April 2024. The titanium alloy open integral micro impeller has a strong material strength and high removal rate in the field of multi-axis CNC machining. The flow channel is tiny and the blades are thin and highly twisted. It is difficult to control the surface accuracy and prone to overcutting and undercutting. The NX2212 software post-processing module plans two distinct blade finishing process routes and verifies them using virtual machine tool simulation, taking into account the technical challenges of micro impeller machining. Following verification, the tool path machining code is imported into MATLAB for data fitting. The workpiece surface working condition is determined based on the simulation findings, the blade surface roughness value is calculated, and a physical simulation model of blade finishing is created in the finite element analysis software. The outcomes demonstrate how well the "segmented and sub-regional cutting" processing method may raise blade accuracy. The leading and trailing edges of the blade both had surface roughness increases of 4.86% and 4.19%. The surface morphology of the micro impeller is measured using a white light interferometer, and it is CNC machined using two distinct process methods. The findings demonstrate that there is a significant difference between the value calculated by the finite element analysis software and the surface roughness value measured experimentally which together make up less than 5%. An investigation of the impact of cutting parameters on the surface roughness of micro-structure components is carried out using a three factor, three-level BBD experiment that is founded on the second-order response surface method. The findings indicate that the feed per tooth influences surface roughness more significantly than cutting depth and cutting speed for a reasonable range of cutting parameters; Surface roughness will rise with lower or higher cutting speeds; Raising the feed per tooth and the cutting speed simultaneously may reduce surface roughness; Surface roughness can be accurately predicted and controlled using the second-order response surface method.

Experimental Research on Five-axis Coordinated Micromilling of Micro Integral Impeller

Planning and virtual simulation machining of multi-axis rough machining strategy for micro-integral impeller

Judging of Machining Feasibility and Calculation of Midsection for the Five-Axis Milling of Shrouded Centrifugal Impeller

An efficient five-axis machining method of centrifugal impeller based on regional milling

Tool Path Planning of the Micro Cowled Integral Impeller

The Technique of 5 - axis NC Machining the Integrated Impeller with Feature - oriented

Machining Trajectory Generation and Simulation of Miniature Integral Impeller

A review of 5-axis milling techniques for centrifugal impellers: Tool-path generation and deformation control

Mesoscale Fabrication of a Complex Surface for Integral Impeller Blades

A novel tool-path generation method for five-axis flank machining of centrifugal impeller with arbitrary surface blades

Plunge Milling Method of Integral Impeller Based on the Maximum Tool-path Planning Area

Experimental Study on Micromilling Deformation Control of Micro-Thin Wall Based on the Optimal Tool Path

Modeling and Precision Machining Simulation of Impeller of Road Machinery

Modeling and machining of integral impeller based on NURBS curve

Numerical Control Milling for Aeroengine Integrated Impeler of TC6 Titanium Alloy

Research on 5-axis CNC Simulation for Whole Impeller based on UG

Simulation and Optimization of Five-axis NC Machining of Integral Impeller Based on Improved Particle Swarm Optimization

Tool Path Planning for Five-Axis U-pass Milling of an Impeller

Multi-axis CNC finishing and surface roughness prediction of TC11 titanium alloy open integral micro impeller

A new rough machining approach for a ruled surface impeller

Optimal CNC plunge cutter selection and tool path generation for multi-axis roughing free-form surface impeller channel