Abstract:The electromechanical co-simulation method was used to simulate and analyze the 6-DOF (degrees of freedom) positioning and micro-vibration isolation functions of the platform in order to analyze the working performances of a contactless positioning and vibration isolation platform which works at space microgravity environment. The working principle of the contactless positioning and vibration isolation platform was introduced. The exciting unit, position measuring unit and acceleration measuring unit of the platform were made up by contactless biaxial actuators, biaxial position sensitive detectors and uniaxial accelerometers according to space symmetry layout scheme. The controller of the platform was designed based on position and acceleration feedback. Then the mechanical system simulation model and the closed-loop control system simulation model based on position and acceleration feedback was established by ADAMS and MATLAB/Simulink, respectively, which together set up the electromechanical co-simulation model of the platform. The positioning and vibration isolation performances of the platform were simulated by the co-simulation model. Results show that the 6-DOF displacement and angular displacement control errors of the platform are less than 10 μm and 2×10−5 rad respectively under small range positioning mode. The suppression efficiencies of the platform for 6-DOF direct sinusoidal disturbances with frequency range of 0.01−1 Hz and 1−100 Hz are 39−73 dB and 19−73 dB, respectively. The relative displacements between the floater and the stator are less than 1 mm during vibration isolation control process under vibration isolation mode.

An attitude and motion simulation device for probe takeoff test from celestial bodies

Electromechanical co-simulation analysis for contactless positioning and vibration isolation platform

Three-dimensional Dynamic Non-Contact Attitude Detection System Based on Optical Path Deflection Technology

Attitude Control For Flexible Spacecraft With Swinging Components

Implementation of Three DoFs Small Satellite Ground Simulation System

Development of a Low-Cost Satellite Three-Axis Attitude Simulator Testbed

IAC-15,E2,2,4,X31653 3-DOF GAS BEARING SIMULATOR FOR SMALL SATELLITE TESTS WITH AUTOMATED MASS DISPLACEMENT CONTROL TO ELIMINATE DISTURBANCE TORQUES

Three-axis air-bearing based platform for small satellite attitude determination and control simulation

START: A Satellite Three Axis Rotation Testbed

Position and pose measurement technology of space combination ground experiment based on machine vision

Characterizing an Air-Bearing Testbed for Simulating Spacecraft Dynamics and Control

A six-degree-of-freedom hardware-in-the-loop simulator for small spacecraft

A Dynamic, Hardware-in-the-Loop, Three-Axis Simulator of Spacecraft Attitude Maneuvering with Nanosatellite Dimensions

Historical survey of kinematic and dynamic spacecraft simulators for laboratory experimentation of on-orbit proximity maneuvers

Research on space docking hil simulation system based on stewart 6-dof motion system

Automatic mass balancing and design of a six degrees-of-freedom air bearing spacecraft simulator

Motion Simulation and Human–Computer Interaction System for Lunar Exploration

Air bearing platforms for simulation of spacecraft attitude control systems

A Robotic Testbed for Positioning and Attitude Accuracy Test of Space Manipulator