Abstract:To optimize the configuration of spatial-temporal resources at intersections with mixed traffic flow of passenger cars and heavy vehicles, this paper proposes a set of mixed integer linear programming（MILP） model with aim to maximize the intersection capacity. In the model, different impacts of the locations of permitted lanes on flows of different modes and vehicle turning maneuvers are considered to increase the model applicability. The constrains on the relative setting position of permitted lanes for left-turn, through and right-turn are released. That’s to say, the permitted left-turn lanes don’t have to be on the left of the permitted through lanes, and the permitted through lanes don’t have to be on the left of the right-turn permitted lanes. This may induce some new flow conflicts（potential conflicts） and whether these conflicts exist is affected by the lane channelization scheme. Thus, some constraints are added in the model, among which one is to identify which potential conflicts are arisen with specific lane scheme, the other is to determine these conflicts’ impact on the configuration of temporal resources at intersections. The results from numerical tests show that this impact will change the configuration of spatial-temporal resources at intersections.Compared with the conventional lane-based model, the modified model can significantly improve the intersection maximum capacity while ensure safe flow propagation. The improvement on the intersection maximum capacity increases with the heavy vehicle proportions and the impact of lane location on travel efficiency. But with the increase of the difference of travel efficiencies between heavy vehicles and passenger cars, the improvement first increases and then decreases.

Integrated Optimization Model of Layouts and Signal Timings of Exit-lanes for Left-turn Intersections

Increasing the Capacity of Signalized Intersections with Dynamic Use of Exit Lanes for Left-Turn Traffic

Optimal allocation model of signalized intersections with dynamic use of exit lanes for left turn

Optimization Method of Signal Timing Parameters Considering Comprehensive Efficiency of All Approach Lanes

Optimization of Signal Timing for the Contraflow Left-Turn Lane at Signalized Intersections Based on Delay Analysis

Increasing the Capacity of Signalized Intersections by Allocating Exit Lanes to Turning Movements

Modeling Capacity at Signalized Intersections with a Left-Turn Storage Bay Considering Signal Timing Plan

Shared-use lane assignment and signal timing optimization at intersections with waiting area

An Integrated Capacity Optimization Model Based on Two Unconventional Intersections

Integrated Optimization Method for Left-turn Phases of Adjacent Junctions

Configuration of Spatial-temporal Resources at Intersections Considering Travel Efficiencies of Mixed Flows

Intersection control strategy optimization based on exchangeable lanes modeling

Integrated Optimization of Lane Markings and Timings for Signalized Roundabouts

Coordinated Optimization of Signal Timing for Intersections with Dynamic Shared Through- and Right-Turn Lanes

Analysis om waiting area for left-turn vehicles at signalized intersections

Traffic control plan optimization for the intersection with contraflow left-turn lane

A Group-Based Signal Timing Optimization Model Considering Safety for Signalized Intersections with Mixed Traffic Flows

Optimal Operation of Displaced Left-Turn Intersections: A Lane-Based Approach

Collaborative optimization model of lane markings and signal timings based on Ring-Barrier phase at intersections

Optimization of Stretching-Segment Design and Signal Timing in Traffic Control

Capacity Matching Based Model for Protected Left Turn Phases Design of Adjacent Signalized Intersections along Arterial Roads