Abstract:The issue of aircraft icing poses a substantial threat to flight safety. In order to investigate more efficient anti-icing and de-icing technologies, a comparative analysis was conducted on the de-icing characteristics of three types of actuator materials under varying conditions. Initially, experimental research was undertaken to analyze the temperature traits of three actuators under ice-free conditions. Three power densities were chosen for the experiment: 0.170 W/cm2, 0.727 W/cm2, and 1.427 W/cm2. The research findings revealed distinct characteristics: plasma actuators and resistance wire actuators exhibited a strip-like high-temperature region during operation, with well-defined boundaries between the high-temperature and low-temperature zones, whereas ceramic-based semiconductor actuators showcased a uniform high-temperature region. As energy consumption rose, the thermal equilibrium temperatures of all three types tended to converge, with resistance wire actuators operating at 1.427 W/cm2, showing the highest temperature rise rate at that power density. Subsequently, experimental research was carried out on the de-icing performance of three actuators under icing conditions at a specific power density. Following 120 s of de-icing, the ice layer covering the surface of the plasma actuator completely melted, forming a cavity. Conversely, the ice layer on the ceramic-based semiconductor actuator remained partially intact in a strip shape. Ice deposits were still visible on the surface of the resistance wire actuator. This observation highlights the remarkable de-icing speed of the plasma actuator. The propulsive force of plasma generated on the fluid inside the ice layer enhances heat transfer efficiency, thereby accelerating the de-icing process of the plasma actuator at the same power density. The analysis of the de-icing performance of these three novel types of actuators establishes a robust groundwork for exploring more effective aircraft de-icing methods. Furthermore, it furnishes theoretical underpinning for the advancement of composite anti-icing and de-icing strategies.

Experimental Research on Thermal Deicing with EMU Model

Experimental Investigation of Deicing Characteristics Using Hot Air As Heat Source

Experiment Investigation on Deicing Characteristics and Energy Efficiency Using Infrared Ray As Heat Source

Unsteady simulation of aircraft electro-thermal deicing process with temperature-based method

Analysis and Research on Energy Consumption of a Non-Contact High-Efficiency Tunnel De-Icing Device

Experimental Study on the Thermal Conductivity for Transmission Line Icing

Discrete element analysis of heating transfer characteristics of airport pavements by using electro thermal method for snow melting and deicing

A New Melting Model in Electrothermal De-Icing Simulation

Comparative Experimental Study on the De-Icing Performance of Multiple Actuators

A Non-thermal De-icing Technique Using Ultrasonic Guided Waves

Experimental investigations on the characteristics of snow accretion using the EMU-320 model train

Numerical Simulation Model of Electrothermal De-Icing Process on Composite Substrate

Deicing Performances of a Road Unit Driven by a Hydronic Heating System in Severely Cold Regions of China

Variation in Anti-icing Power of Superhydrophobic Electrothermal Film under Different Temperatures and Wind Speeds

Electrothermal Ice Protection Systems De-Icing: An Experimentally Validated Idealized Ice Shedding Model

Analysis of Ice Melting Current of Catenary Icing

An Experimental Study on Frosting and Defrosting Performances of a Novel Air Source Heat Pump Unit with a Radiant-Convective Heating Terminal

Integrated Aircraft Thermal Management System Modelling and Simulated Analysis

An eco-friendly asphalt pavement deicing method by microwave heating and its comprehensive environmental assessments

Applied Thermal Process for a Hydronic Snow-Melting System in the Coldest Provincial Capital of China

Analysis of Ice-melting Process for Aerial Conductor