Abstract:In bridge structure monitoring and evaluation, deformation data serve as a crucial basis for assessing structural conditions. Different from discrete monitoring points, spatially continuous deformation modes provide a comprehensive understanding of deformation and potential information. Terrestrial laser scanning (TLS) is a three-dimensional deformation monitoring technique that has gained wide attention in recent years, demonstrating its potential in capturing structural deformation models. In this study, a TLS-based bridge deformation mode monitoring method is proposed, and a deformation mode calculation method combining sliding windows and surface fitting is developed, which is called the SWSF method for short. On the basis of the general characteristics of bridge structures, a deformation error model is established for the SWSF method, with a detailed quantitative analysis of each error component. The analysis results show that the deformation monitoring error of the SWSF method consists of four parts, which are related to the selection of the fitting function, the density of point clouds, the noise of point clouds, and the registration accuracy of point clouds. The error caused by point cloud noise is the main error component. Under the condition that the noise level of point clouds is determined, the calculation error of the SWSF method can be significantly reduced by increasing the number of points of point clouds in the sliding window. Then, deformation testing experiments were conducted under different measurement distances, proving that the proposed SWSF method can achieve a deformation monitoring accuracy of up to 0.1 mm. Finally, the proposed deformation mode monitoring method based on TLS and SWSF was tested on a railway bridge with a span of 65 m. The test results showed that in comparison with the commonly used total station method, the proposed method does not require any preset reflective markers, thereby improving the deformation monitoring accuracy from millimeter level to submillimeter level and transforming the discrete measurement point data form into spatially continuous deformation modes. Overall, this study introduces a new method for accurate deformation monitoring of bridges, demonstrating the significant potential for its application in health monitoring and damage diagnosis of bridge structures.

Analysis and Research on the Monitoring Method of Horizontal Displacement of High-speed Railway Curve Bridges based on Precision Evaluation Theory

Sensor Placement of Long-Term Health Monitoring for Large Bridges Based on the Real-Time Correction of Finite Element Model

High-Precision Monitoring Method for Bridge Deformation Measurement and Error analysis Based on Terrestrial Laser Scanning

Rapid and Precise Measurement Method for Track Static Geometry of Large-Span Bridge Railway

Multi-Point Displacement Monitoring of Bridges Using A Vision-Based Approach

Assessing running safety of high-speed trains on long-span cable-stayed bridges based on in-situ monitoring data

Bridge Dynamic Displacement Monitoring Using Adaptive Data Fusion of GNSS and Accelerometer Measurements

Bridge Displacement Monitoring Method Based on Laser Projection-Sensing Technology

A Novel Mode Sharp-Based Damage Detection Method of Large-Span Bridges

Evaluation of new target structure and recognition for point cloud registration and coordinates transformation of China’s large double-span bridge

Experimental analysis of rotating bridge structural responses to existing railway train loads via time–frequency and Hilbert–Huang transform energy spectral analysis

Efficient Dynamic Performance Prediction of Railway Bridges Situated on Small-Radius Reverse Curves

Study on Evaluation Theory of Bridge Damage State and Methodology on Early Warning of Danger

Study on the estimate for seismic response of high-speed railway bridge-track system

ACCURACY AND ANALYSE OF BRIDGE CONTROL NETWORK

Prediction Study on the Alignment of a Steel-Concrete Composite Beam Track Cable-Stayed Bridge

A smoothness control method for kilometer‐span railway bridges with analysis of track characteristics

Finite Element Analysis of Influencing Factors of the Spherical Bearing Horizontal Offset in an Interchange Curved Bridge in Beijing

A novel evaluation of train running safety on the HSR bridges under earthquakes based on the observed track deformation rate

Condition Monitoring and Quantitative Evaluation of Railway Bridge Substructures Using Vehicle-Induced Vibration Responses by Sparse Measurement

Assessment of the Strengthening of Existing Benchmark Monorail Railway Bridge: A Case Study of a Generic Method for Lateral Reinforcement