Beam Element Considering Lateral Shear Deformation and Axial Force Effect and Its Application in Analysis of Bearing and Pile Combined Action

Wei-zhe LI,Ping LOU
DOI: https://doi.org/10.3969/j.issn.1002-0268.2018.01.007
2018-01-01
Journal of Highway and Transportation Research and Development
Abstract:Based on the elastic stiffness matrixes and the geometric stiffness matrixes of the beam elemen developed by Wang Yongzhong, E. L. Wilson and Zhao Minhua, 3 rigid matrix equations of beam element considering lateral shear deformation and axial force P - Δ effect are derived to simulate the static and dynamic workings of small shear deformation axial forced components such as columns and shear walls and large shear deformation axial forced components such as bearings, which provides a theoretical support for static and dynamic FE analysis of the compressive, flexural, and shear components. Another 2 rigid equations of beam element only considering the axial force P-Δeffect are derived. The theoretical derivation is proved to be correct by degradation analysis. Finally, the eccentric working of the bearing considering lateral shear deformation and axial force P -Δ effect is simulated, the finite element model of the pile of bearing is established, and the self-compiled Matlab finite element analysis program is used for case study. The result shows that (1) the beam element considering lateral shear deformation and axial force P-Δeffect can better simulate the eccentric working characteristics of the bearing with large shear deformation;(2) the eccentric moment caused by vertical force due to large horizontal shear displacement of bearing is significant, it will remarkably affect the mechanical property of foundation pile, increase the axial force P-Δ effect and decrease the composite horizontal rigidity of bearing and foundation pile, effectively increase the internal force and the equivalent calculation length of the pile, and reduce the overall horizontal anti push rigidity, which cannot be ignored. It is suggested that to use the finite element model of the pile and bearing combined action during the pile design and calculation of distribution of horizontal forces of piers.
What problem does this paper attempt to address?