Analysis on Shear Lag Effect of Thin-walled Box Girder Based on Timoshenko Beam Theory

Xia-yuan LI,Jing-yu GUO,Shui WAN,Lung Yi

DOI: https://doi.org/10.3969/j.issn.1002-0268.2018.06.008

2018-01-01

Journal of Highway and Transportation Research and Development

Abstract:Based on the Timoshenko beam theory,a correction to warping displacement function of single concrete thin-walled box girder is made.Considering the shear deformation amplitude difference among each flange plate of the box girder,axial force equilibrium condition across section,and the influence of shear deformation of webs,the warping displacement function is established reasonably,and the total potential energy function of the system is built.The differential equation is derived to analyze the shear lag effect in the stable equilibrium state by using Euler-Lagrange equation,and comparatively analysis of longitudinal stress distribution along different sectional flanges of the simply supported box girder under the concentrated load and the uniformly distributed load along full span are carried out using ABAQUS FE numerical model.The result shows that(1)under concentrated load,the deviation between ABAQUS model result and analytical solution of measuring point 3 near the loading end,where far away from the webs is a little bigger due to the effect of the stress disturbance,this deviation will be controlled under 5％;(2)under uniformly distributed load,the error at top and bottom plates of box can be controlled at about 5％,however,the error between FEM and present method will increase gradually away from the web due to the boundary conditions of cantilever flanges supposed as the same to box flanges,but it can be controlled under 10％.Therefore,the constructed warping displacement function can better reflect the longitudinal stress distribution influenced by the shear lag,it has a good agreement with the result of finite element numerical simulation,which testified the correctness of the proposed analytical method.