Abstract:Cable-stayed bridges have been widely used in large-span bridge engineering because of their large span capacity and novel structure. The frequent traffic of vehicles transporting flammable and explosive materials has increased the incidence of bridge fires. After being burned, the cable-stayed bridge will suffer from varying degrees of damage, which affects its performance. Therefore, mechanical analysis and evaluation of the fire-damaged cable-stayed bridge are necessary. Due to the development of technology, the structural analysis of cable-stayed bridges has gradually shifted from experimental methods to numerical simulation or artificial intelligence methods, and from local performance research to holistic research. In this paper, a fire accident in the Sifangtai Bridge in Harbin, China, is taken as a case study. Finite element software and damage theory calculation methods were used, and the static and dynamic performances of the bridge under the condition of cable fire damage were analyzed. The results show that the variation of cable force during the movement of vehicle load along the bridge is relatively small, within the range of 7% to 12%. The fusing of the upper cables of the bridge tower has the greatest impact on the deflection of the beam, while the fusing of lower cables has the same impact on the deflection of the entire bridge as the undamaged state. Near the fused cables, cable forces change significantly, increasing by over 20%. As the degree of damage increases, the increase in deflection of the beam becomes more pronounced. The impact of different degrees of cable damage on the dynamic performance of cable-stayed bridges is reflected in quantitative changes. As the degree of cable damage and the amount of fusing increase, the change in structural frequency becomes more pronounced. This paper not only provides technical support and a theoretical basis for the performance analysis of cable-stayed bridges damaged by fire, but it also improves the research content of combining static and dynamic performance, which provides important reference values for similar research in the future.

Detection Evaluation and Repairing of Fire Damaged Bridge

Damage Detection and Safety Assessment on Bridge 5tructure after Fire Accident

Performance Monitoring of Damaged Bridge Members Strengthened with Carbon Fiber Reinforced Polymer

Remote Collaborative Pseudo-dynamic Testing of Carbon Fiber Reinforced Plastic Retrofitted Reinforcement Concrete Short Columns of Bridge

Automated damage detection of bridge’s sub-surface defects from infrared images using machine learning

Research on Methods of Damage Diagnosis Based on Bridges with Dynamic Characteristics

Evaluation and Reinforcement of Prestressed Concrete Hollow Slab Bridge after Fire Damage

Review of Vibration-Based Damage Detection and Condition Assessment of Bridge Structures Using Structural Health Monitoring

Vibration-Based Damage Detection Of Cable-Stayed Bridges

Damage detection method for structures based on the relative variation of wavelet total energy

Damage Detecting And Safety Appraisal Of The Extra Bridge On Da-Fu Line

On the Tapping-Scan Method Designed for the Damage Detection of Bridge Structures

Damage Detection and Sensor Placement Design for Two Highway Bridges

Automatic identification method of bridge structure damage area based on digital image

The tap-scan method for damage detection of bridge structures

Static and Dynamic Performance Analysis of Cable-Stayed Bridges with Cables Damaged Fire

In-service performance assessment of fire-corrosion damaged cables of bridges

Recent progress and future trends on damage identification methods for bridge structures

Study on Evaluation Theory of Bridge Damage State and Methodology on Early Warning of Danger

3D LiDAR Scans for Bridge Damage Evaluations

Structural damage identification based on dynamic deflection sensitivity of bridge under vehicle loading