Abstract:Red mud (RM), fly ash (FA) and desulfurized gypsum (DG) are harmful solid wastes that need to be treated. In this study, RM, FA, DG were used as the main raw materials to prepare road base materials based on the different (CaO + Na2O)/(SiO2+Al2O3) molar ratio, and its mechanical properties, durability, microstructure and environmental performance were investigated. The morphology and structure were characterized by X-ray diffraction (XRD), Fourier transform infrared (FTIR), Thermogravimetry-derivative thermogravimetry (TG-DTG), Scanning electron microscopy energy dispersive X-ray (SEM-EDX), Mercury intrusion porosimetry (MIP). The results show that the road base material prepared by RM-FA-DG composites has the highest unconfined compressive strength (UCS) after curing for 7 days when (CaO + Na2O)/(SiO2+Al2O3) = 0.88, which meets the strength requirements of the highway. The UCS of the road base material still increased significantly after curing for 28d and reached 11.49 MPa at 180d. Meanwhile, the best durability is obtained by RM-FA-DG composites. The main hydration products of RM-FA-DG composites are C-A-S-H gel, ettringite and zeolite phase (such as Al2Si2O4(OH)4, Na2Ca2Si5Al5O10·5H2O), which are very beneficial to the development of the compressive strength and durability of road base materials. The best polymerization structure and the pore structure are also obtained by RM-FA-DG composites. The leaching results show that the RM-FA-DG system can effectively consolidate Na+ and other heavy metal ions, and the leaching concentration of ions all meet the drinking water standard of China. In addition, the research has been successfully applied to pilot test in Yangquan, China. Therefore, RM-FA-DG synergistic prepare road base material provides a new idea of synergistic to effective utilization of a large number of industrial solid wastes.

Experiment Research on Road Base Material of Red Mud

Sustainable utilization of bauxite residue (Red Mud) as a road material in pavements: A critical review

Effects of Red Mud on Workability and Mechanical Properties of Autoclaved Aerated Concrete (AAC)

In-situ Experiment on Urban Road Subgrade Improved by Plain Concrete Pile and Mixed-in-place Pile

Preparation, characterization and application of red mud, fly ash and desulfurized gypsum based eco-friendly road base materials

Field Experimental Study on Compound Foundation of Dry Jet Mixing Pile in Highway

Simulation study on basic road performance and modification mechanism of red mud modified asphalt mixture

Analysis of the Synergistic Effect on the Strength Characteristics of Modified Red Mud-Based Stabilized Soil

Mechanical and microstructural properties of silt roadbed filling improved with cement, red mud and desulfurization gypsum

The Use of Waste Materials Red Mud and Fly Ash as Road Embankment Fill

Experimental Investigation on Red Mud from the Bayer Process for Cemented Paste Backfill

Performance Study of Stabilized Recycled Aggregate Base Material with Two-Gray Components

Influence of Mechanical and Microscopic Properties of Red Sandstone Modified by Different Solid Waste Materials

Experimental Investigation into the Shakedown State of Unsaturated Road Base Aggregate at Various Fine Contents and Matric Suctions

Investigation on the application of steel slag–fly ash–phosphogypsum solidified material as road base material

Material properties and environmental implications of red mud solidified with blast-furnace slag, silica fume, and sodium hydroxide

A systematic characterization of the mixture of red mud and bottom ash as a geomaterial: an efficient utilization in subgrade pavement

Utilization of red mud in high-performance grouting material for semi-flexible pavement

Experimental research on long-term dynamic characteristics of unsaturated road base and subbase mixtures

Experimental Study on the Curing Mechanism of Red Mud-Based Stabilized Soil Co-Modified by Nano-SiO2 and Gypsum

Influence of Red Mud on Swelling-shrinkage and Mechanical Performance of Compacted Expansive Soil