Abstract:Hashuang bridge is type of prestressed concrete box girder oblique bridge and it is located in Harbin City within Heilongjiang province in the east north of China. The objectives of this study are to investigate the appearance of the bridge structure and identify all the damages in the bridge structural members and to evaluate the structural performance of the bridge structure under dead and live loads. Finite element analysis is used to analyze the static designed internal forces and dynamic responses by adopting SAP200 software Ver. 14.2.0. Static and dynamic load test are adopted to evaluate the structural performance of the bridge structure. The results of field investigation process of the bridge appearance show that the bridge suffers from serious damages. The web of box girder of the second span near pier No.2 (in the quarter of middle span at 39m on the bridge length) suffers from serious shear cracks. The state of abutments, piers and sidewalks is good, but the bearing, drainage holes, steel rail and expansion joints are not good and they suffer from much damage. The steel rail is corroded and the expansion joint loses the material which fills the joint. There are many dusts and debris is collected on the bridge deck in the location near sidewalk. The analysis results of finite element and load tests show that there are high tensile stresses in the quarter of middle span at distance 39 m of the bridge length and the state of the bridge structure is not good and the main problem of the bridge structure in the original design of prestressed tendons. Therefore, this study recommends for repairing and strengthening the bridge structure to increase the stiffness and strength and to improve the bearing capacity of the bridge structural members to increase the service live of the bridge structure.

Local Stress Analysis of Anchorage Zones of Qin Bridge

An analytical method and its application for large-section PC box girder bridges

Stress Behavior in Embedded Connection Zone of Box Girder with Corrugated Steel Webs

Spatial Analysis of Self-anchored Suspension Bridge and Its Experimental Study

The Finite Element Analysis of the End Anchorage under Larger Prestressing Load in Rehabilitation Engineering

Probabilistic Analysis of Stress Concentration Factor of an Orthotropic Steel Bridge with FBG-Based Structural Health Monitoring System *

Fatigue Performance Evaluation for an Orthotropic Steel Bridge Deck Based on Field Hotspot Stress Measurements

Spatial behavior and strengthening analysis of fabricated PC hollow slab beam bridge with hinge joints

Analysis of Support Abutments of Curved Bridges with Single-pedestal Piers

Stress Performance Analysis of Special-shaped Arch Bridge with Longitudinal Linkage

Hot Spot Stress Approach For Fatigue Life Assessment In Welded Bridge Connections Using Monitoring Data And Fem Analysis

Finite Element Analysis of Structural Hot-Spot Stress for Orthotropic Steel Bridge Deck

Finite Element and Experimental Analysis and Evaluation of Static and Dynamic Responses of Oblique Pre-stressed Concrete Box Girder Bridge

Field Test and Analysis for the Static and Dynamic Behaviour of Multi-Box Steel Concrete Composite Girder Bridge

Study of Dynamic Behavior and Influences Induced by Structural Parameter Variations of Self-Anchored Suspension Bridge

Study on Method of Simulating Spatial Effect of Prestressing Force in Bridge

Simulation Analysis of Girder Transport Process on the Box Girder of Hangzhou Bay Bridge

Stress Analysis on Steel Anchor Block of External Prestressing Concrete Bridges

STUDY ON THE RIGID FRAME BRIDGE STRENGTHENED BY EXTERNAL PRESTRESSING TENDONS AND ANCHOR BLOCKS

Analysis of Parametric Influence on Anchorage of Cable-stayed Bridge