Research on Characteristics of Aerodynamic Noise Source for High-speed Train

ZHANG Jun,GUO Tao,SUN Bang-cheng,ZHOU Shao-ze,ZHAO Wen-zhong
DOI: https://doi.org/10.3969/j.issn.1001-8360.2015.06.002
2015-01-01
Abstract:A three‐dimension computational fluid dynamics model including a head nose‐coach , a middle coach , a tail nose‐coach ,a pantograph and 6 bogies was built . The exterior transient fluid field was calculated using the large eddy simulation(LES) from Fluent software to obtain the time‐domain Lighthill acoustic source term . The time‐domain acoustic source term was transformed into frequency‐domain acoustic source term through Fourier transformation . A finite element‐infinite element model was used to calculate the aerodynamic noise a‐round the head nose‐coach and its bogie , the pantograph , the tail nose‐coach and its bogie , to gain the acous‐tic pressure distribution and the characteristics of the aerodynamic noise source of a high speed train . The cal‐culation results showed that maximum aerodynamic noise existed at the pantograph head slide plate where there was more high frequency noise .At the speed of 300 km/h ,the maximal sound pressure level(SPL) reached 156.3 dB .The pantograph base had high SPL as well where there was more low‐frequency noise .With respect to the head nose‐coach and the first bogie , the noise at the bogie was significantly higher than that at the nose position of head coach , with the maximal SPL reaching 135.3 dB and 129.7 dB respectively . On the contrary , the noise at the nose position of the end coachwas higher than that at last bogie . The total SPL of the aerody‐namic noise was progressively declining in the sequence of the pantograph head slide plate , pantograph base , the nose position of the end coach , the first bogie and the nose position of the head coach . T he validity of the calculation results presented in this paper has been confirmed by a comparative analysis with existing literature .
What problem does this paper attempt to address?