Abstract:A resistant muffler is the most direct and effective means of reducing exhaust noise from earthmoving equipment. Different types of construction machinery require different mufflers. Current muffler design is mostly experience-based, and there are blind spots in the design process. The optimization scheme must constantly be revised to achieve satisfactory noise reduction. The use of a large number of optimization schemes are wasteful in terms of both cost and time. Therefore, an effective and time-saving design method for muffler optimization is needed. An optimization approach, known as the "local structural optimization method for a resistant muffler", based on orthogonal analysis is proposed in this study to optimize the design of a resistant muffler with a complex structure. The results of an orthogonal analysis for a simulation of the muffler structure show that the muffler acoustic and aerodynamic performances are affected by the inlet pipe, outlet pipe, insertion pipe, cross-flow perforated pipe and other local structures, and the results are employed to determine the influence law for the transmission loss (TL) and the exhaust back pressure, considering the local structural parameters of the muffler. The method is applied to optimize the design of a muffler suitable for an excavator and verified by performing an installation test. The experimental results show that the improved designs reduces the exhaust noise by 5 dB and the exhaust back pressure by 0.6 kPa. The improved designs exhibit higher aerodynamic and acoustic performances than a muffler prototype, showing that the proposed method is accurate, effective and reliable. The proposed method considerably simplifies the design process and saves time and cost. This method provides theoretical guidance and an optimization process for the design of a muffler for construction machinery.

Tailpipe Noise Optimization of A Vehicle at Idle Speed Using Muffler with Cross-Flow Perforated Tube

Numerical Analysis and Structure Improvement of Automotive Exhaust Muffler's Acoustic Characteristics

Numerical Analysis of Acoustic Characteristic of Muffler with Complicated Structure and Structural Optimization

Numerical Simulation and Structure Optimization of Compressor Muffler

Numerical Analysis on Acoustic Characteristics of Automotive Exhaust Muffler by Transfer Matrix Method

Simulation and Improvement of Silencer at Turbocharger Outlet

Numerical simulation and test validation for performance of a muffler in an exhaust pipe

Finite Element Method Simulation Analysis for Sound Field of Exhaust Muffler

Multi-objective optimization of muffler for vehicle air-conditioning compressor pipeline

Structural Performance Analysis and Optimization of Small Diesel Engine Exhaust Muffler

Acoustic Performance of A Water Muffler

Rectangular-Pulse Method Based on Simulation and Experiment of Acoustic Performance of Perforated Intake Pipe

Design and Performance Evaluation of Muffler at Turbocharger Inlet

Transmission Loss Simulation Based on Rectangular-Pulse Method and Experimental Evaluation of Acoustic Performance of Perforated Intake Pipe

Exhaust Muffler Design Based on CFD

Sensitivity analysis and noise reduction optimization design of the insert-pipe double expansion chamber muffler

CFD Analysis of a Transfer Matrix of Exhaust Muffler with Mean Flow and Prediction of Exhaust Noise

Local Structural Optimization Method Based on Orthogonal Analysis for a Resistant Muffler

Research on the Influence of Characteristics of the Annular Connecting Pipe on the Transmission Loss of the Expanded Exhaust Muffler

A Computational Fluid Dynamics Approach for Full Characterization of Muffler Without and with Exhaust Flow

Theoretical Study on a Water Muffler