Abstract:With the proposal of "dual-carbon" goals and increasingly stringent emission regulations, hydrogen as a zero-carbon alternative fuel has great potential in engine applications. In the appliance of pure hydrogen engines, direct injection plus lean burn technology can effectively improve engine performance and reduce emissions. Therefore, this work establishes a three-dimensional (3D) simulation model of the pure hydrogen spark-ignition internal combustion engine (ICE) coupled with chemical reaction kinetics. Then, the applicability of different commonly used hydrogen simplified mechanisms to characterize the combustion process based on experimental data is evaluated, and the feasibility of the transient calculation model is verified. Then, the engine combustion and emission performance are compared by adopting hydrogen port injection (HPI) and hydrogen direct injection (HDI) strategies. Meanwhile, the effects of hydrogen injection timing (HIT) on flow, combustion and nitric oxide (NO) emission processes under direct injection plus lean burn mode are analyzed. The results show that: 1. For mixture distribution at ignition timing (IT), the hydrogen should be distributed near the spark plug and avoid its concentration being too rich since the richer mixture will lead to intense combustion and rapid heat release. 2. When using HDI mode, the engine combustion performance and power performance are better than that of the HPI mode. Delaying HIT, the power performance improves under HDI modes, while both the indicated thermal efficiency (ITE) and indicated mean effective pressure (IMEP) reached the maximum at Case6-HDI-100 with the values are 40.52 % and 0.498 MPa, respectively. 3. Considering the engine combustion, power and emission performance, Case6-HDI-100 (HIT at 100 °CA BTDC) is the preferred scheme. Its ITE and IMEP are 8.49 % and 37.33 % higher than that of Case1-HPI (HPI mode scheme) and 6.50 % and 14.95 % higher than that of Case4-HDI-220 (the lowest scheme under HDI mode), respectively, while nitrogen oxide (NO x ) emissions meet the European Stage V non-road emission standards. This study provides some reference values for the combustion design of pure hydrogen ICEs.

Multi-dimensional Simulation Study of an HCNG Engine

Numerical Simulation of HCNG Engine on GT-Power

One Dimensional Numerical Simulation of SI HCNG Engine

Numerical Simulation of Homogeneous Charge Compression Ignition Combustion Using A Multi-Dimensional Model

Numerical Exploration on Hcci Combustion Characteristics under Nvo Strategy

Numerical Simulation of HCCI Engine with Multi-Stage Gasoline Direct Injection Using 3D-CFD with Detailed Chemistry

Development and Validation of a Quasi-Dimensional Combustion Model for SI Engines Fuelled by HCNG with Variable Hydrogen Fractions

Numerical Simulation of Combustion in HCCI Engine Using Multi-Dimensional Model ( Ⅱ ) —— discussion on expanding to higher loads with several different methods

Numerical Simulation of Combustion in HCCI Engine Using Multi-Dimensional Model(Ⅰ)——Construction and comparison of models

Research on 3-D Numerical Simulation of Hydrogen Engine

Experimental and Modeling Study of Performance and Emissions of SI Engine Fueled by Natural Gas–hydrogen Mixtures

Numerical Simulation of Gasoline Stratified Charge Compression Ignition Using 3D-CFD Coupled with Detailed Chemistry

Simulation and Analysis of Hydrogen-fueled Engine Combustion

A Simulated Study on the Combustion and Emission Performances of Diesel Engines

Numerical Simulation Research of HCCI Diesel Engine Combustion Process

Numerical investigation on gaseous fuel injection strategies on combustion characteristics and NO emission performance in a pure hydrogen engine

Numerical Modeling of Diesel Engine Combustion and Emissions Under HCCI-Like Conditions With High EGR Levels

Study on the NOx Emissions Mechanism of an HICE under High Load

Numerical Simulation of Hydrogen-Air Combustion in Meso-Scale IC Engine

Comparative study of the NOx prediction model of HCNG engine

Simulation of Combustion in Spark-Ignition Engine Fuelled with Natural Gas-Hydrogen Blends Combined with EGR