Abstract:Accurate information regarding the weight of vehicle loads plays a significant role in maintaining the structural health of bridges. However, the only method currently available for ascertaining the weight of loads is the bridge weigh-in-motion (BWIM) system, which is not widely used because of the high cost of the large device involved. There is therefore a need to develop an effective, low-cost technology to ascertain vehicle loads in relation to spatiotemporal load distribution on long-span bridges. This paper proposes a non-contact vehicle identification methodology to distinguish a vehicle from its load based on machine vision technology and deep learning algorithms. The vehicle information (i.e., type, weight, position, and motion trajectory, etc.) is conveniently obtained from a roadside monitoring surveillance camera, while the axle-weight distribution interval for nine classified vehicle types is obtained from the statistical information of 8,402 delivery vehicles from which the relationship between a unique vehicle type and the corresponding weight information is established. Meanwhile, a dataset containing 8,624 vehicle images was established for training the deep convolutional neural network (DCNN), where nine rough-grained vehicle classifications were contained in order to enhance the generalizability of the network. Optimization analysis was conducted to improve the network accuracy in vehicle types identification. The position of vehicles can also be effectively detected by a faster region-based convolutional neural network (Faster R-CNN), where the pre-trained DCNN with 98.17% vehicle types classification accuracy is employed as the co-shared network layer to enhance computation efficiency. Utilizing the object detection results from the Faster R-CNN and utilizing a Kalman filter, a vehicle in motion could also be simultaneously real-time tracked by the monitoring video, while a graphical user interface (GUI) incorporated into the video camera enabled automatic identification. A post-processing module has been established based on the proposed method, and a field test was conducted to validate the reliability of the system.

A Research on Vehicle On-Board Weighing System Based on BP Neural Network

Study on Dynamic Weighing System Base on Intelligent Algorithm

Research on On-Board Dynamic Weighing Algorithm Based on Two-Degree-of-freedom 1/4 Vehicle Model

A combined method for vehicle load identification based on machine vision and BP neural network

Mpg Prediction Based On Bp Neural Network

Real-time online detection of trucks loading via genetic neural network

Tire⁻Pavement Contact-Aware Weight Estimation for Multi-Sensor WIM Systems

A non‐contact identification method of overweight vehicles based on computer vision and deep learning

A signal processing method for dynamic weighing system by SSA-LVQ network

Truck model recognition for an automatic overload detection system based on the improved MMAL-Net

Research on Data Processing of Dynamic Vehicle Weighbridge with Wavelet Neural Network

Vision-Based Overload Detection System for Land Transportation

NOx Emission Prediction for Heavy-Duty Diesel Vehicles Based on Improved GWO-BP Neural Network

Research on the air brake system of heavy haul trains based on neural network

Application of the Improved BP Neural Network in Ship and Ocean Engineering

Vehicle weight identification system for spatiotemporal load distribution on bridges based on non-contact machine vision technology and deep learning algorithms

A Dynamic Weighing Method for Portal Crane in Bulk Port: Based on Clustering and BP Neural Network

A Load Forecasting Model Of Bp Neural Network Based On Bayes

E-Commerce across Boarder Logistics Risk Evaluation Model Based on Improved Neural Network

Analysis and Prediction of Passenger Volume Base on BP Neural Network

Research on Construction Method of the Prediction Model for Semi-Trailer On-Board Weighing System