Abstract:The hydrodynamic forces and motions of ship advancing in waves are estimated by using 3D frequency domain potential flow theories. The 3D translating and pulsating (3DTP) source panel method is employed to solve the radiation and diffraction potential problems, in which a semi-analytical scheme is established to get more robust results of integration of Green's function over panels. Added wave resistance is mainly categorized into the contributions of radiation and diffraction. The added wave resistance due to radiation motion of ship is evaluated by the radiation energy principle according to 3D hydrodynamic coefficients and ship motions, while the one due to diffraction is calculated based on steady-state force formula. The motions and added wave resistances of Wigley III hull and S175 containership advancing in waves with various forward speed are calculated and analyzed in frequency domain based on the above mentioned methods. The numerical results are validated for the models by comparing them with experimental data. The results by classic methods commonly used in engineering and the data from published papers are plotted together for comparison and discussion. Better agreement with experimental data in the prediction of peak value and its frequency of added resistance is achieved by present method. It also indicates that the correction of relative motion amplitude should be taken into account so as to improve the accuracy. Component analyses of added wave resistance are carried out and the results show the percentages of radiation part and diffraction part at various frequency respectively. The present method is of satisfactory accuracy and efficiency, which provides a rapid and robust approach to predict added wave resistance of ships voyaging in waves.

Modified Empirical Method of Added Wave Resistance for Container Ships

Analysis and comparison of the prediction of the added resistance for ships in regular waves based on theoretical and empirical methods

Investigation on practical correction for added resistance prediction of tankers

An Investigation into Added Resistance of Vessels Advancing in Waves

Investigation into the Direct Calculation of Added Wave Resistance of Ship in Forward Motion with Reflection Ratio Correction

Study on the Resistance of a Large Pure Car Truck Carrier with Bulbous Bow and Transom Stern

Added Wave Resistance Computations Using Desingularized Source And Panel Methods

Numerical Investigation on Three-Dimensional Radiated Energy Method and a New Computation Formula for Total Added Resistance Prediction

Numerical Study on Added Resistance Computations in Short Waves

Investigations on applicability of 2.5D theory for calculation of motions and added resistance of ship advancing in waves

Numerical Calculation of Added Resistance of Ships in Waves Based on Weakly Nonlinear Assumption

Computation Of Wave Added Resistance By Control Surface Integration

Numerical analysis of added resistance in head waves on a Polar Research Vessel and conventional ships

Analysis of the overall structural strength and optimization recommendations for ultra-large container ships based on the improved equivalent design wave method

Research on Wave-Making Resistance Simulation of SWATH Ships

Evaluation of the Effect of Container Ship Characteristics on Added Resistance in Waves

Study Of Wave Added Resistance And Motions Of Kcs In Waves With Different Wave Lengths

Investigation on the Effect of Container Configurations and Forecastle Fairings on Wind Resistance and Aerodynamic Performance of Large Container Ships

Numerical Simulation of Ship Motion and Calculation of Added Resistance in Heading Waves

Predicting practical ship powering and speed loss in waves using added resistance test results

Correction of the Resistance Calculation Method for Full Form Ships