Abstract:<p>Due to the high superstructures and complex configurations of luxury cruise ships, the impacts of wind loads on the ships must be analyzed during design. In this study, the aerodynamic performance of a Vista-class cruise ship was investigated through wind tunnel measurements, empirical formulae and numerical calculations. Wind tunnel experiments were conducted in a simulated atmospheric boundary layer wind field, and the measured data exhibited reliable wind load characteristics of the cruise ship. Three empirical formulae were employed to estimate the wind loads on the cruise ship. The comparison between the estimated results and the experimental data indicated that the general characteristics of the wind loads on generic ship types summarized by empirical formulae were not consistent with those on the Vista-class cruise ship. Numerical simulations based on the Reynolds-averaged Navier-Stokes (RANS) equations were performed under the same conditions as those of the wind tunnel experiments. Mesh independence and Reynolds number independence analyses were carried out. The numerical results of the wind loads matched well with the experimental data. Valuable flow field details captured by the numerical calculations were also extracted to analyze the flow characteristics around the cruise ship. The results demonstrated that the Vista-class cruise ship is a typical blunt body. The wind loads on the cruise ship were sensitive to the Reynolds number. The reversed-flow zones around the ship were primarily distributed over the front/back sides of the ship, the top deck, and the ship's leeward side. These reversed-flow zones were mostly induced by the flow separation at the corners of the bow and aft decks and the sharp edges of the top deck. The analysis of the flow characteristics around the ship can provide guidance for future optimization of the aerodynamic performance of the Vista-class cruise ship.</p>

Research on Wind Load Coefficients of an Inland Cruise Ship Based on CFD

The Numerical Simulation for the Wind Fields and Wind Loads Around Spatial Structures

NUMERICAL WIND TUNNEL TECHNIQUE FOR THE WIND RESISTANCE ANALYSIS OF LONG SPAN SPATIAL STRUCTURES

Analysis of Wind Load Effect on Ship Loader in Shipping Process

Wind tunnel experiment and numerical simulation of wind pressure distribution of long-span ellipsoidal shell structure

Numerical Simulation of Wind-Induced Interference Between Two Cylindrical Latticed Shells in Parallel Arrangement

Investigation on aerodynamic performance of luxury cruise ship

CFD-FEM simulation of hydroelastic responses and slamming loads of a bow-flare ship advancing in head regular waves

Comparative study on steady wave-making problem using viscous and potential-flow methods

Numerical Investigation on Steady Wave of High-Speed Ship with Transom Stern by Potential Flow and CFD Methods

Structural Finite Element Simulation and Evaluation Method for Ship Collision Damage and Residual Strength of the Jacket

Research on ship motion characteristics in a cross sea based on computational fluid dynamics and potential flow theory

Numerical Simulation and Calculation of the Hydrodynamic Forces and Motions of Ships in Head Waves

Efficiency Analysis of Sail-Assisted Ship Based on CFD

Influence of wind load on predicting parametric rolling of real ship

Estimation of Hydrodynamic Coefficients of Ship in Numerical Wave Tank

Study on the Estimation Method of Wind Resistance Considering Self-Induced Wind by Ship Advance Speed

Research on the Wind Pressure Distribution of Inflable Structure Based on the First Fredholm Integral Equation

Numerical simulation of ship motion and non-linear sea loads of a modern frigate in regular waves

Investigation on the Effect of Container Configurations and Forecastle Fairings on Wind Resistance and Aerodynamic Performance of Large Container Ships

A method for ship resistance prediction based on CFD computation