Abstract:To study the flexural behavior of prestressed concrete beams with high-strength steel reinforcement and high-strength concrete and improve the crack width calculation method for flexural components with such reinforcement and concrete, 12 specimens were tested under static loading. The failure modes, flexural strength, ductility, and crack width of the specimens were analyzed. The results show that the failure mode of the test beams was similar to that of the beams with normal reinforced concrete. A brittle failure did not occur in the specimens. To further understand the working mechanism, the results of other experimental studies were collected and discussed. The results show that the normalized reinforcement ratio has a greater effect on the ductility than the concrete strength. The cracking- and peak-moment formulas in the code for the design of concrete (GB 50010-2010) applied to the beams were both found to be acceptable. However, the calculation results of the maximum crack width following GB 50010-2010 and EN 1992-1-1:2004 were considerably conservative. In the context of GB 50010-2010, a revised formula for the crack width is proposed with modifications to two major factors: the average crack spacing and an amplification coefficient of the maximum crack width to the average spacing. The mean value of the ratio of the maximum crack width among the 12 test results and the relative calculation results from the revised formula is 1.017, which is better than the calculation result from GB 50010-2010. Therefore, the new formula calculates the crack width more accurately in high-strength concrete and high-strength steel reinforcement members. Finally, finite element models were established using ADINA software and validated based on the test results. This study provides an important reference for the development of high-strength concrete and high-strength steel reinforcement structures.

Calculating Formula and Experiment Study on Ultimate Flexural Capacity of External Prestressed Composite Steel- Concrete Beams

RESEARCH ON FLEXURAL PERFORMANCE OF DOUBLE-STEEL REINFORCED CONCRETE BEAM

EXPERIMENTAL STUDY ON FLEXURAL BEHAVIOR OF REINFORCED CONCRETE BEAMS PRE-STRESSED WITH CFRP TENDONS

LOAD-CARRYING CAPACITY ANALYSIS OF CONTINUOUS STEEL-CONCRETE COMPOSITE BEAMS STRENGTHENED BY EXTERNAL PRESTRESS

Flexural performance investigation of steel-concrete composite beams strengthened with prestressed CFRP tendons in the negative bending moment region

Finite Element Modeling of Concrete Beams Prestressed with External Tendons

Analysis of Prestressing Load and Whole Mechanical Process of Externally Prestressed Continuous Composite Beams

ULTIMITE FLEXURAL CAPACITY OF COMPOSITE STEELCONCRETE BEAMS BEAMS WITH PARTIAL SHEAR CONNECTION

Flexural Behavior of Steel Deep Beams Prestressed with Externally Unbonded Straight Multi-Tendons

Study on the Flexural Deformation Behavior of High-Titanium Heavy-Slag Concrete Composite Beams: Material Application, Experimental Investigation, and Theoretical Refinement

Experimental and Theoretical Investigation of Prefabricated Timber-Concrete Composite Beams with and Without Prestress

Flexural Behavior Of External Prestressed Composite Beam With Corrugated Steel Webs

Experimental Study and Theoretical Prediction on the Flexural Behavior of Unbonded, Post-tensioned Precast Beams Made of Recycled Aggregate Concrete

Flexural behavior of high-strength, steel-reinforced, and prestressed concrete beams

Practical Design Approach for Calculating Flexural Capacity of Steel Reinforced Ultra-high Toughness Cementitious Composite Bending Beams

Mechanical Behavior Analysis of High Strength Concrete Beams in Architectural Design: Simplified Calculation Method of Flexural and Shear Bearing Capacity

Experimental and theoretical study on flexural behavior of steel-concrete composite beams strengthened by CFRP plates with unbonded retrofit systems

Flexural Behavior of Steel-Mpc Based High Performance Concrete Composite Beams Subjected to Hogging Moments

Experimental Study on Composite Steel-concrete Beams with Box Sections Under Combined Bending and Torsion

ANALYSIS ON TORSIONAL STIFFNESS FOR COMPOSITE STEEL-CONCRETE BEAMS

A Comprehensive Study on the Effect of Reinforcing Methods on the Flexural Behaviour of Concrete-RUHTCC Composite Beams