Abstract:The external piping system which connects power devices, valve control devices, actuators, etc. is an essential system on the aero engine. Under the combined effects of high fluid pressure and external vibration, multiaxial fatigue failure is the main factor that seriously affects the safety of the piping system. The objective of this paper is to establish the multiaxial fatigue life model for the typical welded fuel pipe of the piping system by combining fatigue testing, simulation and theoretical analysis which is of great guiding significance for the engineering application of the piping system. Firstly, the fatigue limits of welded fuel pipes under no and 13.5 MPa internal pressure are obtained by rotational bending fatigue tests using the up-and-down method. Three additional stress levels of rotational bending fatigue tests under no internal pressure are supplemented and then the S-N curve is further obtained by the group method. Since the corresponding fracture surface of the specimens locates at the weld toe near the fixed end, peak stress method is adopted to evaluate the fatigue performance of the weld toe on the pipe specimens. In addition, by comparing the fatigue limit with no and 13.5 MPa internal pressured pipes, it is obvious that the equivalent uniaxial stress corrected by Gerber formula is not applicable for the multiaxial fatigue condition which is caused by the combined effect of fluid pressure and displacement load. The local stress concentration factor caused by the weld toe is determined and based on Findley critical plane model, the multiaxial fatigue life model is established which simultaneously takes the local stress concentration effect, mean stress effect and multiaxial stress effect into consideration. The results of rotational bending fatigue tests under 13.5 MPa internal pressure are within the triple error dispersion band and the accuracy of the proposed life model are verified.

A Fatigue Life Prediction Method for Longitudinal Deck Stiffener Nodes in Large Container Vessels

Fatigue Life Assessment in the Typical Structure of Large Container Vessels Based on Fracture Mechanics

Calculation of Stress Intensity Factors of Surface Cracks at Weld Toe of Longitudinal Stiffener Joints in a Container

Fatigue Crack Growth Life Prediction of Cracks in Complex Stress Field

Fatigue life prediction of weld-joints under variable amplitude fatigue loads

Prediction of Fatigue Crack Growth in a Ship Detail under Wave-Induced Loading

Fatigue Behaviour of L-section Stiffener to Crossbeam Joints in Orthotropic Steel Bridge Decks

Experimental study on the fatigue failure mechanism of key joints in deepwater semi-submersible platform structures

Prediction of crack growth of surface crack at bracket toe of ship under random wave loading condition

Fatigue Performance Testing and Life Prediction of Welded Fuel Pipes

Fatigue Life Prediction of Cracked Stiffened Plate Using the Improved Fatigue Crack Growth Rate Model

Security life assessment of crack flaws in high tensile steel deck of large container ships

Fatigue Crack Growth Calculation of a Surface Crack in a Ship Angular Joint

Prediction of long-term fatigue life of CFRP composite hydrogen storage vessel based on micromechanics of failure

An Engineering Method to Predict Fatigue Crack Propagation Life for Marine Structures

A Fatigue Life Prediction Method for Resistance Spot Welds Based on Average Stress Intensity Factor

A Unified Fatigue Life Prediction Method for Marine Structures

A Unique Crack Growth Rate Curve Method for Fatigue Life Prediction of Steel Structures

Spectral-based Fatigue Crack Propagation Prediction for Very Large Floating Structures

A Method to Predict Stress Intensity Factor of Surface Crack at Weld Toe of Offshore Structures under Wave Loads

Fatigue Crack Initiation Prediction of Cope Hole Details in Orthotropic Steel Deck Using the Theory of Critical Distances