Abstract:Particle suspensions exist widely in nature and engineering applications, and their viscous characteristics have an important influence on their flow behavior. Based on the Darcy-Stokes coupling model, the analytical formulas of effective viscosity of dilute suspensions containing porous particles are derived in this paper. Firstly, an auxiliary problem is solved, that is, the disturbance caused by porous media spheres in the flow field with linear distribution under the condition of low Reynolds number. The fluid flows in the free-flow domain and porous medium are governed by the Stokes equation and Darcy’ law, respectively. The mass conservation law, the balance of normal forces, and the Beavers-Joseph(-Saffman) interface condition are used at the fluid–porous interface. An analytical solution for the present coupled free-flow and porous-medium system is derived by using the undetermined coefficient method. Then the additional heat dissipation rate caused by the porous media particle is calculated. Intrinsic viscosity of the porous media suspension under the condition of low concentration is determined as a function of the Darcy number and the Beavers-Joseph coefficient, which is based on the additional heat dissipation rate under the condition of low concentration. It is found that the intrinsic viscosity increases with increasing the Beavers–Joseph coefficient, and the larger the Beavers–Joseph coefficient is, the slower the increase of the intrinsic viscosity. When Darcy number is in the range of \begin{document}${10^{ - 6}}$\end{document} to \begin{document}${10^{ - 4}}$\end{document} , the intrinsic viscosity is close to 2.5, which was consistent with the classical Einstein viscosity formula. When Darcy number is in the range of \begin{document}${10^{ - 4}}$\end{document} to \begin{document}${10^{ - 1}}$\end{document} , the intrinsic viscosity decreases rapidly, so the effective viscosity coefficient of porous media suspension is closer to the viscosity of the based fluid. At last, the present effective viscosity formula is compared with that obtained by the Darcy-Brinkman equation coupling with the shear stress jump condition. It can be found that the effective viscosities obtained two different models agree well with each other in the low Darcy number regime when the sum of the Beavers-Joseph coefficient and the shear stress jump coefficient is unity.

Equivalent Viscous Damping Coefficient of Sucker Rod String Wave Equation

Simulation on Hysteresis Characteristic of Squeeze Mode Magneto-Rheological Damper Based on Non-Convex Constitutive Relation

Application and Effect of Buoyancy on Sucker Rod String Dynamics

Longitudinal wave propagation in a rod with variable cross-section

Longitudinal vibration analysis of sucker rod based on a simplified thermo-solid model

A time-domain method for free vibration responses of an equivalent viscous damped system based on a complex damping model

Equivalent Viscous Damping System for Viscoelastic Fractional Derivative Model

Physical Essence and Influence of Model Parameters on Dynamic Response of Rayleigh Damping

Discussion on the Reynolds Equation for the Slipper Bearing Modeling in Axial Piston Pumps

Stiffness and Damping Coefficients for Journal Bearing Using the 3d Transient Flow Calculation

A Numerical Method For Damping Computation Of Rigid Cylindrical Containers

Experimental study on the dynamic performance of a winding rope fluid viscous damper

Equivalent pipe algorithm for metal spiral casing and its application in hydraulic transient computation based on equiangular spiral model

THE EFFECTIVE VISCOSITY OF A SUSPENSION OF POROUS PARTICLES BASED ON THE DARCY-STOKES COUPLING MODEL

Analysis of flow in liquid jet pump—PartⅡ: Determination of dimensionless coefficients in theoretical model

Studies of Exit Pressure Recovery Coefficient and Its Effects on Dynamic Characteristics of Annular Water Seals

3D FSI FEA SIMULATION AND ANALYSES OF THE DYNAMIC CHARACTERISTICS OF A DISPLACEMENT-SENSITIVE LIQUID DAMPER

Finite element modeling of straight pipeline with partially attached viscoelastic damping patch based on variable thickness laminated element

Improvement for Modeling the Damping of the Wake Oscillator Based on the Van Der Pol Scheme

Thermo-elastohydrodynamic mixed-lubrication model for reciprocating rod seals

Numerical Algorithm for Fluid–solid Coupling in Reciprocating Rod Seals