Analysis of flow in liquid jet pump—PartⅡ: Determination of dimensionless coefficients in theoretical model

Wang Yuchuan,Cao Shuliang,Gao Chuanchang,Wang Songlin

DOI: https://doi.org/10.3969/j.issn.1674-8530.2013.01.001

2013-01-01

Abstract:The relations of dimensionless coefficients,geometry parameters of cross-section and flow variables have been derived in a theoretical model of jet pumps.Those coefficients were determined by using numerical simulation of flow in the pump,and then their relationships with flow ratio were analyzed.It was indicted that the reaction force distribution coefficient c1 is nearly equal to the suction area ratio c at the best efficiency point;at the other flow conditions,however,two coefficients show significant difference.In fact,replacing c1 with c doesn′t cause a remarked error in theoretical prediction results.When the working fluid velocity keeps to be constant,the momentum correction coefficient k1 is independent of flow ratio,thus can be treated as a constant;the coefficient k2 shows a hyperbolic function against flow ratio,and asymptotically approaches to 1 as the flow ratio increases.The nozzle discharge coefficient 1 and suction chamber discharge coefficient 4 are constant in all the working conditions.The uniformity of velocity distribution in the diffuser inlet has a great influence on the diffuser velocity coefficient 3.The velocity correction coefficient at the throat 2 and the velocity correction coefficient 5 at the inlet to the nozzle of suction chamber decrease linearly as the flow ratio increases.They affect the results of theoretical model remarkably.The theoretical predictions show good agreement with the experiment results,confirming that the method proposed for determining the dimensionless coefficients is feasible and the model is reliable.