Abstract:Since the underwater impurity and cavitation could have a significant impact on the aerodynamic performance of tidal turbine blade airfoil, it is necessary to consider both roughness and cavitation in the process of optimization design. In the present study, a novel multi-objective evolution algorithm based on NSGA‐II is proposed for the design of tidal turbine blade airfoil, to overcome the adverse effects of cavitation and roughness. Non-uniform rational B-spline (NURBS) representation is adopted in the process of optimization; a new performance evaluation index of airfoil under rough condition is formed; multi-objective optimization was conducted for NACA2415 airfoil. The minimum pressure coefficient is the criterion used for the identification of cavitation on tidal turbine blade airfoil. The CFD and XFOIL are employed to calculate the lift drag coefficient and pressure coefficient of airfoil. The transition position of airfoil is predicted by the improved transition model. A comprehensive experimental study was conducted to evaluate the aerodynamic performance of optimized airfoil, revealing flow patterns such as flow separation over the initial airfoil and optimized airfoil through smoke flow experiment. In order to simulate the rough condition, sandpaper was pasted on the leading edge surface of airfoil and experiments indicated that location and formation of laminar separation bubble were affected . Numerical simulation and experimental results show that the optimized airfoil enjoys a better aerodynamic performance than the original ones under the roughness condition, in terms of cavitation inhibition. Within the range of design conditions, the lift drag ratio of optimized airfoils increased by an average of 20% and the minimum pressure coefficient peak decreased by about 17.2% on average. Thus,the proposed method can effectively guide the design and technical reserve of the tidal turbine.

Studying Optimization Design of Low Reynolds Number Airfoil Using Transition Model

Multiobjective Shape Optimization of A Hypersonic Lifting Body Using A Correlation-Based Transition Model

Particle Swarm Optimization of Aerodynamic Shapes with Nonuniform Shape Parameter–Based Radial Basis Function

Flow Reconstructions and Aerodynamic Shape Optimization of Turbomachinery Blades by POD-based Hybrid Models

Simulation Analysis and Experimental Study on Airfoil Optimization of Low-Velocity Turbine

Laminar Transition over Airfoil: Numerical Simulation of Turbulence Models and Experiment Validation

Numerical Investigation on the Transition Flow around NLF Airfoil

Airfoil Optimization Using a Machine Learning-Based Optimization Algorithm

A Study of Multi-Objective Aerodynamic Optimization Design for Variable Camber Airfoils and High Lift Devices

AIRFOIL OPTIMIZATION WITH TRANSITION CURVE AS OBJECTIVE FUNCTION

Aerodynamic shape optimization at low Reynolds number using multi-level hierarchical Kriging models

Performance optimization and investigation of flow phenomena on tidal turbine blade airfoil considering cavitation and roughness

Research on precise and standardized numerical simulation strategy for vehicle aerodynamics

Airfoil Shape Optimization: Comparative Study of Meta-heuristic Algorithms, Airfoil Parameterization Methods and Reynolds Number Impact

Transition Effects on Flow Characteristics Around a Static Two-Dimensional Airfoil

Study On Flow Separation And Transition Of The Airfoil In Low Reynolds Number

Study on Airfoils and Aerodynamics of High-Speed Aircraft Propeller

Numerical Analysis Of Active Flow Control Around Airfoil By Synthetic Jet Technology In Low Reynolds Number

Natural Laminar Flow Airfoil Design via Adjoint-Based Transition Onset Delay

Multi-objective robust airfoil optimization based on non-uniform rational B-spline (NURBS) representation

Supercritical natural laminar flow airfoil optimization for regional aircraft wing design