Abstract:Successful initiation of a detonation in a confined combustor with limited length is a formidable task for designing the detonation-based engines, shortening the length for the run-up distance of a detonation greatly reduces the weight of the detonation engine, rendering the detonation propulsion become possible in the advanced aerospace propulsion systems. In this work, we proposed a new method that using a non-reactive gas jet (CO2) to facilitate the formation of the precursor shock wave and the flame propagation speed in a deflagration wave in a stoichiometric methane-oxygen mixture, by changing a series of the injection parameters, i.e., the initial pressure of mixture, the jet delay time, the jet pressure and its position, the effects of those parameters on the deflagration propagation are systematically investigated. The experimental results show that, the development processes of pressure rise are divided into two stages prior to the DDT: 1) slow deflagration stage, which characterized by two discrete shock waves named as the 1st shock wave and 2nd shock wave; 2) Fast deflagration stage, the two discrete waves merge into a strong precursor shock wave, and the velocities of precursor shock and flame achieve to the "quasi-detonation" state. The experimental results also illustrate that, introducing the CO2 jet in the first stage prior to the DDT promotes the formation of precursor shock wave and accelerates the flame speed, which speeds up the transformation of a detonation in a shorter distance. By comparing different jet parameter combinations, it is found that high jet pressure and long jet time increase the local concentration of CO2, which adversely affect the formation of a detonation. Thereby there exists an optimal condition of injection, whose injection pressure ratio is 15, jet delay time is 20 ms and jet position is found to be 0.6 m, those parameters are verified to have prominent detonation-enhancement effects on DDT, the underlying mechanisms for those optimal conditions are explored and explained in this study. This study provided new experimental evidences supporting the theory of turbulence-enhancement effect on the initiation of a detonation.

Experimental Research on Operating Frequency Effect on the Characteristics of Two?Phase Detonation Initiation

Numerical Investigation on Effects of Ignition Energy on Two-phase Detonation Wave Formation

The effect of operating frequency and ignition energy on JP-10/PO/aluminum powder multiphase-pulse-detonation-engine

Experimental research on initiation characteristics of a rotating detonation engine

Numerical Investigation on New Engine Combustion Charactristic of Helicopter

Effects of Fuel-Supply Position on Detonation Waves and Working Frequency in an Aero-Valve Pulse Detonation Engine

Characteristics of multi-cycle two-phase pulse detonation waves traveling near the lean combustion limit

Influence of high-pressure intermittent fuel supply mode on operation characteristics of pulse detonation combustor

Experimental Investigation on Delay Time Phenomenon in Rotating Detonation Engine

Namerical Simulation on Factors Affecting Ignition Characteristics of A New Engine

Effect of ethylene fuel/air equivalence ratio on the dynamics of deflagration-to-detonation transition and detonation propagation process

Effect of ignition parameters on detonation initiation using toroidal shock wave focusing

The precursor shock wave and flame propagation enhancement by CO2 injection in a methane-oxygen mixture

Detonation development in PRF/air mixtures under engine-relevant conditions

Numerical research on kerosene/hydrogen/air rotating detonation engines with discrete injection strategies

Experimental Study of Atomization Effects on Two-Phase Pulse Detonation Engines

Numerical investigation of detonation initiation for low-volatility liquid fuel/air mixtures

Experimental Investigation on the High-frequency Pressure Oscillation Characteristics of a Combustion Process in a DI Diesel Engine

Experimental investigation on pulse operation characteristics of rotating detonation rocket engine

Experimental Research on Ignition, Quenching, Reinitiation and the Stabilization Process in Rotating Detonation Engine

Numerical investigation of detonation initiation in a modeled rotating detonation engine