Experimental research on initiation characteristics of a rotating detonation engine
Chenglong Yang,Xiaosong Wu,Hu Ma,Lei Peng,Jian Gao
DOI: https://doi.org/10.1016/j.expthermflusci.2015.10.019
IF: 3.2
2016-02-01
Experimental Thermal and Fluid Science
Abstract:An experimental study on a rotating detonation engine model using hydrogen/air mixture as propellant was conducted to analyze the initiation characteristics of detonation wave. Three ignition methods, including the ordinary spark plug, high-energy spark plug and thermal-jet tube, were used in the tests. The initiation process of rotating detonation wave was recorded and analyzed by a high frequency pressure measurement system and high-speed photographs. Operating range of the model engine was determined by series of experiments. Results indicate that the model engine could be successfully run by all the three ignition methods. Although the detonation formation time using spark plugs is quite stochastic, increasing the ignition energy can reduce the formation time of the detonation wave. Among the three ignition methods, thermal-jet provides the shortest detonation formation time. It is also found that the operating characteristic of the model engine is independent of the ignition device in the same operating condition. Three operation modes of the engine model have been observed, which are failed initiation of the detonation, unstable detonation and continuous rotating detonation. The experimental results show that the stable operating range can be extended by increasing the fuel mass flow rate.
engineering, mechanical,thermodynamics,physics, fluids & plasmas