Abstract:Background Dislocation is the second most common complication of hip replacement surgery, and impact of the prosthesis is believed to be the fundamental reason. The present study employed Solidworks 2003 and MSC-Nastran software to analyze the three dimensional variables in order to investigate how to prevent dislocation following hip replacement surgery.Methods Computed tomography (CT) imaging was used to collect femoral outline data and Solidworks 2003 software was used to construct the cup model with variabilities. Nastran software was used to evaluate dislocation at different prosthesis positions and different geometrical shapes. Three dimensional movement and results from finite element method were analyzed and the values of dislocation resistance index (DRI), range of motion to impingement (ROM-I), range of motion to dislocation (ROM-D) and peak resisting moment (PRM) were determined. Computer simulation was used to evaluate the range of motion of the hip joint at different prosthesis positions.Results Finite element analysis showed: (1) Increasing the ratio of head/neck increased the ROM-I values and moderately increased ROM-D and PRM values. Increasing the head size significantly increased PRM and to some extent ROM-I and ROM-D values, which suggested that there would be a greater likelihood of dislocation. (2) Increasing the anteversion angle increased the ROM-I, ROM-D, PRM, energy required for dislocation (ENERGY D) and DRI values, which would increase the stability of the joint. (3) As the chamber angle was increased, ROM-I, ROM-D, PRM, Energy-D and DRI values were increased, resulting in improved joint stability. Chamber angles exceeding 55 resulted in increases in ROM-I and ROM-D values, but decreases in PRM, Energy-D, and DRI values, which, in turn, increased the likelihood of dislocation. (4) The cup, which was reduced posteriorly, reduced ROM-I values (2.1-5.3-) and increased the DRI value (0.073). This suggested that the posterior high side had the effect of 10 anteversion angle.Conclusions Increasing the head/neck ratio increases joint stability. Posterior high side reduced the range of motion of the joint but increased joint stability; Increasing the anteversion angle increases DRI values and thus improve joint stability; Increasing the chamber angle increases DRI values and improves joint stability. However, at angles exceeding 55, further increases in the chamber angle result in decreased DRI values and reduce the stability of the joint.

Causes and Management of Early Dislocation after Total Hip Arthroplasty

Causes and managements of early dislocation after total hip arthroplasy

Causes and Managements of Dislocation after Total Hip Arthroplasty

Causes and management of prosthesis dislocation after artificial hip replacement

Incidence, Timing, and Predictors of Hip Dislocation After Primary Total Hip Arthroplasty for Osteoarthritis

Position of the Prosthesis and the Incidence of Dislocation Following Total Hip Replacement

Early Dislocation after Ceramic-on-Ceramic Total Hip Arthroplasty

Plain Radiography Findings to Predict Dislocation after Total Hip Arthroplasty.

Management of early-stage hip dislocation after hemipelvic endoprosthesis reconstruction:14 cases of reportc

Identification of risk factors for treatment failure of closed reduction and abduction bracing after first-time total hip arthroplasty dislocation

Early Total Hip Arthroplasty for Severe Displaced Acetabular Fractures

Unstable total hip replacement: why? Clinical and radiological aspects

Treatment of Recurrent Total Hip Arthroplasty Dislocation Caused by Distorted Proximal Femoral Anatomy Due to a Previously Healed Trochanteric Fracture

Multivariate Analysis of Risk Factors for In-Hospital Dislocation Following Primary Total Hip Arthroplasty

Traumatic Dislocation of the Hip:Ma Nagement and Results

Prevention of Prothesis Dislocation after the Revision of Total Hip Arthroplasty

Clinical Analysis of the Treatment of Congenital Dislocation of the Hip in Adults with Total Hip Arthroplasty Follow-Up Study of 24hips in 20 Patients

Early complications following artificial hip joint replacement-A re port of 36 cases

Risk Factors for Revision After Early and Delayed Total Hip Arthroplasty Dislocation. An Analysis of Lithuanian Arthroplasty Register

Difficult complications after hip joint replacement. Dislocation.

Effect of Repairing Capsule and Short External Rotators on Postoperative Dislocation Rate Following Pri-Mary Total Hip Arthroplasty