Abstract:For the practical applications of CO 2 sorbents, more studies on pellet rather than powder-type sorbents is a more mainstream research trend. In addition, high sorption kinetics, excellent cycling stability, and cheap raw precursors are far more important than its initial CO 2 uptake value to a certain extent. Recently, alkali titanates have attracted growing attention as emerging and attractive high-temperature CO 2 sorbent materials. Among the existing Na-doped alkali titanates, potassium sodium titanate (KNaTiO 3 ) is one of the most promising high-temperature CO 2 sorbent due to its high CO 2 sorption rate and excellent cyclic stability. In order to promote its practical application in industry, a low-priced titanium ore was selected for the synthesis of KNaTiO 3 , and the optimized resulting sorbent maintained a rapid and reversible sorption capacity of 15.5 wt% after 100 cycles. Spherical pellets were fabricated by extrusion-spheronization method with cellulose and alumisol additives. The optimal pellets exhibited a relative compression strength of 4.15 MPa and an attrition rate of 1.2 wt% as well as maintaining a sorption capacity of 14.3 wt% after 50 cycles. It also showed superior CO 2 capture kinetics, reaching a high CO 2 removal rate of 92.5% within only 4 min (under 20% CO 2 ). The role and mechanism of cellulose as pore-former were explored by SEM analysis and diffusion model fitting. In all, the optimized resulting sorbent pellets not only retained rapid CO 2 sorption kinetics, high CO 2 removal rate, excellent cyclic performance, but also ensure robust mechanical properties. These properties, as well as the low cost aspect, makes this newly developed KNaTiO 3 -based pellets to be highly promising for high temperature CO 2 capture such as for biomass fired power plants or hydrogen production.

Effect of TiO2 dopant on CO2 capture performance of Na2CO3/Al2O3

Properties of a Nano CaO/Al2O3 CO2 Sorbent

Properties of SiO_2 Coated Nano SiO_2/CaCO_3 Sorbents by Precipitation Method

In Situ Preparation of CaTiO3 and Its Effect on CO2 Sorption Performance of Nano-Cao–catio3 Adsorbent

A new nano CaO-based CO2 adsorbent prepared using an adsorption phase technique

Adsorption Properties of Coating Modified Nano CaO-Based CO2 Adsorbents

The effect of BeO on heat transfer and durability of nano-CaO-based CO<sub>2</sub> adsorbents

Behavior of CaTiO3/Nano-CaO As a CO2 Reactive Adsorbent

Properties of a Nano CaO/Al<sub>2</sub>O<sub>3</sub>CO<sub>2</sub>Sorbent

Regenerable MgO-based Sorbents for CO2 Capture at Elevated Temperature and Pressure: Experimental and DFT Study

The Effect of CaO Content on Sorption Performance of Nano CaO Based CO2 Adsorbent

Characteristics of MgO-based Sorbents for CO2 Capture at Elevated Temperature and Pressure

Promotion of MgO Sorbents with Eutectic Carbonate Doping for High-Temperature and Pressure CO2 Capture

Self-Assembled Core-Shell Structure MgO@TiO2 as a K2CO3 Support with Superior Performance for Direct Air Capture CO2

Synthesis of na-doped lithium metatitanate and its absorption for carbon dioxide

Scalable synthesis of KNaTiO3-based high-temperature CO2 capture material from high titanium slag: CO2 uptake, kinetics, regenerability and mechanism study

Investigation on a Novel CaO–Y2O3 Sorbent for Efficient CO2 Mitigation

Application of Density Functional Theory in Studying CO2 Capture with TiO2-supported K2CO3 Being an Example

TiO(OH) 2 – highly effective catalysts for optimizing CO 2 desorption kinetics reducing CO 2 capture cost: A new pathway

Synthesis of Sodium Carbonate Based Solid Adsorbents and Their CO2 Adsorption Performance

Fabrication of structurally improved KNaTiO 3 pellets derived from cheap rutile sand for high-temperature CO 2 capture