Abstract:Under-race lubrication can increase the amount of lubricating oil entering a bearing and greatly improve lubrication and cooling effects. The oil-air two-phase flow characteristics inside a ball bearing with under-race lubrication play a key role in lubrication and cooling performance. The motions of ball bearing subassemblies are complicated. Ball spin affects the oil volume fraction. In this paper, the coupled level set volume of fluid (CLSVOF) method is used to track the oil-air two-phase flow inside the ball bearing with under-race lubrication. The influence of various factors on the oil volume fraction inside the ball bearing with under-race lubrication is investigated, particularly rotating speeds, inlet velocity and the size of oil supply apertures under the inner ring. The influence of the ball spinning is analyzed separately. The result demonstrates that, on account of the centrifugal force, lubricating oil is located more on the outer ring raceway at rotational speeds of 5000 r/min, 10,000 r/min, 15,000 r/min and 20,000 r/min. The oil volume fraction inside the bearing gradually increases at an oil inlet velocity of 5 m/s, 10 m/s and 15 m/s. The circumferential distribution of oil is also similar. As the diameter of the oil supply aperture increases from 1.5 mm to 2 mm, the oil volume fraction increases inside the ball bearing. However, the oil volume fraction slightly decreases from 2 mm to 2.5 mm of oil supply aperture diameter. Ball spin does not affect the circumferential distribution trend of the lubricating oil, but slightly reduces the oil volume fraction. Furthermore, ball spin causes the surface fluid to rotate around its rotation axis and increases the speed.

Numerical Analysis on Temperature Rise for Oil-Air Lubrication Two-Phase Flow of High-Speed Angular Contact Ball Bearings

Numerical Investigation of Two-Phase Flow for the Oil-Air Lubrication Inside an Angular Contact Ball Bearing

Analysis of Circulation Characteristics and Heat Balance of High-Speed Rolling Bearing under Oil-Air Lubrication

Thermal-mechanical Fully Coupled Analysis of High-Speed Angular Contact Ball Bearings

Analysis of Oil-Air Two-Phase Flow Characteristics inside a Ball Bearing with Under-Race Lubrication

Air Flow Patterns and Noise Analysis Inside High Speed Angular Contact Ball Bearings

Investigation on Internal Air Flow Pattern of Angular Contact Ball Bearing with Different Cage Guiding Approaches

Effects of oil-air lubrication methods on the internal fluid flow and heat dissipation of high-speed ball bearings

Analysis of Thermal Effect on Elastohydrodynamic Lubrication in Angular Contact Ball Bearing

Flow Performance Analysis of Different Air Supply Methods for High Speed and Low Friction Ball Bearing

Analysis of the Heat Transfer Performance Inside Cavity of the Counter Rotating Dual Rotor Bearing

Numerical Investigation on Flow Pattern of Air-Oil with Different Viscosities Lubrication

Research on the influencing factors of thermal characteristics of high-speed grease lubricated angular contact ball bearing

Numerical Investigation of Air–Oil–Thermal Coupling Mechanism in Floating Ring Bearings

Heating analysis of the high speed ball bearing

Analysis of Thermo-Mechanical Coupling of High-Speed Angular-Contact Ball Bearings

A Simulation Analysis of Ball Bearing Lubrication Characteristics Considering the Cage Clearance

Effect of structure and assembly constraints on temperature of high-speed angular contact ball bearings with thermal network method

Multi-objective Optimization Design of Sliding Bearing of High-speed Centrifugal Pump Based on Lubrication Characteristics Analysis

Study on Operating Temperature of High-Speed Cylindrical Roller Bearings

Investigation on Heat Dissipation Characteristic of Ball Bearing Cage and Inside Cavity at Ultra High Rotation Speed