Abstract:International Journal of Structural Stability and Dynamics, Ahead of Print. Natural vibration characteristics of a cantilever beam that is parametrically excited by pitch motion are theoretically investigated in this work. A partial differential equation governing the parametrically excited bending vibration of the beam is established by employing the generalized Hamiltonian principle. Normal modal functions of the bending vibration are obtained based on the method of separation of variables. It reveals that the dynamic pitch motion cannot change the modal shapes of the bending vibration of a uniform beam. Principal vibrations of the beam are studied by taking into account two cases of [math] and [math], where [math] and [math] are the first and second principal bending stiffness, respectively. The bending stiffness is considered as the superposition of a constant stiffness with a small perturbation. With the aid of the Fourier series theory and the method of multiple scales, the principal vibrations of the parametrically excited system at non-resonant and resonant cases are analyzed by introducing a small natural parameter [math], while natural vibration characteristics of the beam are obtained and the orthogonal properties of modal functions are illustrated. Theoretical methods provided in this work are verified by using the finite element method, assumed modes method and direct numerical integrations to the governing equation based on a rectangular beam model. It reveals that theoretical results coincide with numerical results very well. Finally, the influences of design parameters including the beam height, beam width, beam length, slender ratio, aspect ratio, pitch amplitude, pitch frequency and pitch phase on natural frequencies of a harmonic pitching beam are discussed. It shows that the width, height, length, slender ratio, aspect ratio and pitch amplitude have dramatic influences on the natural frequencies of the pitching beam, while the pitch frequency and pitch phase have little effect on natural frequencies.

Characteristics of self-excited vibration based on speed feedback control

Self-Sensing Waveform Control for a Low-Frequency Electromagnetic Vibrator

Performance Analysis of High-Static-low-dynamic Stiffness Vibration Isolator with Time-Delayed Displacement Feedback

An Adaptive Feedback Vibration Control Algorithm

Realization of low-distortion ultra-low-frequency vibration based on feedback control technology

Control Strategy for Multi-Exciter Random Vibration Test

Dynamic modeling and vibration response analysis of high speed motorized spindle

Vibrational Amplitude Frequency Characteristics Analysis of a Controlled Nonlinear Meso-Scale Beam

Non-contact Rotor Vibration Velocity Sensor and Its Application to Vibration Control of a Flexible Rotor on Active Magnetic Bearings

Self-balancing characteristics of a vibrating system with four reverse internal-driving degrees of freedom

Characteristics Analysis and Electrical Parameters Identification of the Rotary Piezoelectric Vibrator of the Ultrasonic Actuator

Vibration harmonic suppression technology for electromagnetic vibrators based on an improved sensorless feedback control method

Experimental Study on Dynamic Characteristics of Linear Parametrically Excited System

Experimental Research on Active Vibration Control of Flexible Cantilever Beam under Harmonic and Stochastic Excitation

Design and modeling a frequency self-tuning vibration energy harvester for rotational applications

Mode Control of Vibration in Piezoelectric Cantilever Beam

Dynamic characterisation of a nonlinear electromagnetic force model under simple harmonic excitation

Enhanced energy harvesting using time-delayed feedback control from random rotational environment

Dynamic characteristics and frequency response features of active structures

Natural Vibration Characteristics of a Cantilever Beam Parametrically Excited by Pitch Motion

Secondary resonance of a cantilever beam with concentrated mass under time delay feedback control