Effect on Beam Dynamics from Wakefields in Travelling Wave Structure Excited by Bunch Train
Dan Wang,W. Gai,Chunguang Jing,J. L. Power,Jiaqi Qiu,Chuanxiang Tang
DOI: https://doi.org/10.18429/jacow-ipac2015-mopje001
2015-01-01
Abstract:Electron bunch train technology is used to excited coherent high power RF radiation in travelling wave (TW) structures. This article concentrates on the analytical expression of wakefields excited by bunch train in TW structures and the effects of wakefields on beam dynamics. We focus on the first monopole mode and the first dipole mode wakefields. The long range wake function has a linear decrease which agrees well with the ABCi simulations. Taking example of the 11.7 GHz wakefields structure at the Argonne Wakefield Accelerator (AWA) facility, with 1.3 GHz interval drive electron bunch train, we have done the beam dynamics simulation with a point to point (P2P) code. Results shows the effects of wakefields on the energy distribution and the transverse instability for each sub-bunch. INTRODUCTUION Electron bunch train is used as drive beam to resonantly excited wakefields in travelling wave (TW) structure. In the two beam accelerator scheme in linear accelerators [1], driven beam is usually consists of ps sub-bunches, and the interval between bunches is the RF periods. The beam dynamics of the drive beam is affected by both the self-wake of each bunch and the long range wake from the head bunches. A lot of tracking codes can be applied to study the self-wake effect by means of a convolution integral or sum, based on the mesh technology, such as in ASTRA [2]. For the case of long range wake field effect caused by the head bunches, since the bunch interval is much longer than the bunch length, sub-bunches are always taken as point particles in order to reduce mesh and computation cost [3]. When concern about the motion of each particles in the drive beam, due to bunch instability such as beam break up (BBU) issue, we have to calculate the interaction between the wakefields and all the particles, thus a point to point (P2P) beam dynamics simulation code is desired. This paper starts from the analysis expression of the first monopole and the first dipole mode wake fields in TW structure. Taking the 11.7 GHz X-band TW PETS as an example, with drive bunch train of 1.3 GHz interval at the Argonne Wakefields Accelerator (AWA) facility, the P2P simulations show the longitudinal and transverse wake effects on each sub-bunch. WAKEFIELDS IN TRAVELLING WAVE STRUCTURE The Gradient of a Single Mode Wakefield Figure 1: Single mode wakefields in TW structure. When a drive particle with charge (red dot shown in Fig. 1) passing through a PETS of length , wakefields is generated. Ignoring the attenuation, the electric field has constant gradient along Z direction for a single mode wake [4]. Once we know the parameters of the structure at certain mode, including the R over Q, relative group velocity , and wake frequency , we can figure out the gradient. The gradient of the first monopole mode (TM01) wake field is: / / 01 01 01 01 (s) 2 cos( ) ( ) (s ) (1) w d w s E Q H s Boolean L c Here is the loss factor of TM01 mode, is the Heavenside step function and is the duration of the wake field. The in Eq. 1 declares the finite duration of wakefields in finite TW structure. For clarity we will omit the Boolean word in the following discussion. The duration of the wake is: 01 01 (s) (1 / 1) (2) g w S L L Loss factor in Eq. 1 is defined with the group velocity modification in TW structure 01 01 01 01 1 4 (1 ) g R