Abstract:A facile displacement reaction is employed to fabricate the MCI based on the AlCl3 and metallic Sn. Owing to the homogeneously distributed metallic Sn and amorphous AlCl3‐based membrane, the modified anode regulates Al deposition, achieves a superior electron/ion transfer, and acquires excellent corrosion resistance. Thus, long‐cycling and stable Al‐ion batteries are constructed via AlCl3/Sn‐based MCI. Metallic aluminium (Al) anodes are considered to be a promising alternative for large‐scale energy storage due to their inherent low cost, high safety and ideal weight/volume capacity (2980 mAh g−1/8040 mAh cm−3). However, aluminum‐ion batteries (AIBs) based on room‐temperature ionic liquid electrolytes have encountered challenges in practical applications, such as side reactions and slow sluggish kinetics. The anode/electrolyte interface has attracted considerable attention for addressing the aforementioned challenges. Here, an AlCl3/Sn‐based mixed ionic/electronic conductor interface (MCI) is designed through a facile displacement reaction. The stability of the modified Al metal anode has been significantly enhance by superior charge transfer, excellent corrosion resistance and dense deposition morphology. Consequently, in symmetric cell, the Al@Sn electrode with MCI offers a lifespan for about 700 h (350 cycles) at 0.1 mA cm−2. Moreover, combined with the graphite cathode, the pouch cells based on this novel anode present outstanding cycling performance, demonstrating a maintained capacity of 87.1 mAh g−1 after 450 cycles. This research presents an innovative Al‐metal anode for ionic liquid‐based Al‐ion batteries.

Process for preparing polymeric aluminium chloride through dimensionally stable anodes

ChemInform Abstract: Li2OHCl Crystalline Electrolyte for Stable Metallic Lithium Anodes.

Optimum Conditions for the Formation of Al13 Polymer and Active Chlorine in Electrolysis Process with Ti/RuO2-TiO2 Anodes.

The electrochemical production of highly effective polyaluminum chloride

Method for preparing and comprehensively utilizing metal aluminum through coal ash pellet chlorination electrolysis

Study on the highly effective synthesis of polyaluminum chloride by electrodialysis

Preparation of Nano-aluminum Powder in AlCl3-EMIC Ionic Liquid

Direct electrochemical reduction of low titanium chlorides into titanium aluminide alloy powders from molten eutectic KCl–LiCl–MgCl2

New Process Research on Aluminium Production from Non-Traditional Aluminum Resource by Microwave Chlorination

Characteristics of nanosized polyaluminum chloride coagulant prepared by electrolysis process

Regulating the Double-Way Traffic of Cations and Anions in Ambipolar Polymer Cathodes for High-Performing Aluminum Dual-Ion Batteries

Preparation and Characterization of Polyaluminum Chloride Containing High Content of Al-13 and Active Chlorine

Preparation and Characteristics of Polyaluminium Chloride by Utilizing Fluorine-Containing Waste Acidic Mother Liquid from Clay-Brine Synthetic Cryolite Process

Preparation of High Concentration Polyaluminum Chloride by Chemical Synthesis-Membrane Distillation Method with Self-Made Hollow Fiber Membrane.

Refining process method for producing anhydrous aluminum chloride through high aluminum fly ash

Electro-Chemical Detachment Process of Through-Hole Porous Anodic Alumina Membrane

Optimization of an Artificial Solid Electrolyte Interphase Formed on an Aluminum Anode and Its Application in Rechargeable Aqueous Aluminum Batteries

A Mixed Ionic/Electronic Conductor Interphase Enhances Interfacial Stability for Aluminium‐Metal Anode

Selection principles of polymeric frameworks for solid-state electrolytes of non-aqueous aluminum-ion batteries

Increasing Anhydrous Chromium Chloride Concentration in AlCl3–EMIC Ionic Liquid: a Step Towards Non-Hydrogen-embrittlement Chromium Electroplating

Optimum conditions for Al13 polymer formation in PACl preparation by electrolysis process.