Experimental Investigation on Ultra-Thin Vapor Chamber with Composite Wick for Electronics Thermal Management
Shiwei Zhang,Haoyi Huang,Jingjing Bai,Caiman Yan,Huarong Qiu,Yong Tang,Fangqiong Luo
DOI: https://doi.org/10.3390/mi15050627
IF: 3.4
2024-05-07
Micromachines
Abstract:Ultra-thin vapor chambers (UTVCs) are widely used to cool high-power electronics due to their excellent thermal conductivity. In this study, a UTVC of 82 mm × 58 mm × 0.39 mm with composite wick was prepared. The composite wick is composed of two layers of copper mesh and multiple spiral-woven meshes (SWMs), and the composite wick was applied in UTVC to improve liquid replenishment performance and temperature uniformity. Furthermore, the thermal performance of UTVCs with different support column diameters, filling ratios (FRs), and SWM structures was experimentally studied. The results found that the equivalent thermal conductivity (ETC) decreases as the diameter of the support column increases; the UTVC with 0.5 mm support column diameter has the highest ETC, at 3473 W/(m·K). Then, the effect of FR on the heat transfer performance of UTVCs with SWM numbers of 0, 1, 2, and 3 (0 SWMs, 1 SWM, 2 SWMs, 3 SWMs) is consistent, the 30% FR UTVC with 3 SWMs having the highest ETC, at 3837 W/(m·K). Finally, the increased number of SWMs can significantly improve the ultimate power of the UTVCs, the UTVC with 3 SWMs having the highest ultimate power, at 26 W. The above experimental studies indicate that the designed and manufactured UTVCs have great potential advantages in thermal dissipation for electronics.
chemistry, analytical,nanoscience & nanotechnology,instruments & instrumentation,physics, applied