Abstract:<p>Surface modification of reverse osmosis membranes by the deposition of antifouling coatings is a popular strategy for the control of membrane biofouling. This study reports the preparation of simultaneously anti-adhesive and biocidal membrane surfaces by dip-coating of a single silane, N1-(3-trimethoxysilylpropyl) diethylenetriamine. The operational parameters for surface modification such as acid concentration and immersion time were optimized to obtain the best results. To improve the bacterial killing capabilities, the silane films were quaternized using ethyl iodide. Subsequent characterization of the coated membranes with Fourier Transform Infra Red (FTIR) spectroscopy confirmed the presence of the silane on the membrane surface. Surface elemental analysis of the modified surfaces using X-ray Photoelectron Spectroscopy (XPS) confirmed the quaternization of the Nitrogen atoms. Advanced microscopy techniques (Scanning Electron & Atomic force) revealed a smoothening of the coated surface after quaternization. Contact angle measurements showed a significant increase in surface hydrophilicity after silane deposition (from ∼85° to58°)and a slightly further increase upon quaternization (∼58–53°). Bacterial adhesion and antimicrobial studies with a <em>B. subtilis</em> species showed much significantly lower no. of bacterial cells on the coated and quaternized surface with a killing rate of more than 80%. Cross-flow filtration tests using a custom-built laboratory setup showed that the presence of coating did not compromise on the permeation characteristics; infact, quaternization resulted in a significant improvement (∼50%) in the permeate water flux. The coated membranes were quite effective in retarding biofilm formation and subsequent permeate flux decline in long-term fouling experiments with bacteria-containing water.</p>

A biomimetic antimicrobial surface for membrane fouling control in reverse osmosis for seawater desalination

Antifouling and Antibacterial Bioactive Metabolites of Marine Fungus (terrein)/polyamide Thin-Film Composite Reverse Osmosis Membranes for Desalination Applications

Modification of microfiltration membranes by alkoxysilane polycondensation induced quaternary ammonium compounds grafting for biofouling mitigation

A novel membrane showing both hydrophilic and oleophobic surface properties and its non-fouling performances for potential water treatment applications

Contemporary Antibiofouling Modifications of Reverse Osmosis Membranes: State-of-the-art Insights on Mechanisms and Strategies

Facile preparation of antiadhesive and biocidal reverse osmosis membranes using a single coating for efficient water purification

Fabrication of Anti‐fouling Thin‐film Composite Reverse Osmosis Membrane Via Constructing Heterogeneous Wettability Surface

Improved Flux and Anti-Biofouling Performances of Reverse Osmosis Membrane Via Surface Layer-By-Layer Assembly

Robust In Situ Fouling Control toward Thin-Film Composite Reverse Osmosis Membrane via One-Step Deposition of a Ternary Homogeneous Metal–Organic Hybrid Layer

A Dopamine/Tannic-Acid-Based Co-Deposition Combined with Phytic Acid Modification to Enhance the Anti-Fouling Property of RO Membrane

Surface engineering for anti-wetting and antibacterial membrane for enhanced and fouling resistant membrane distillation performance

Biomimetic Hydrophilization Engineering on Membrane Surface for Highly-Efficient Water Purification

Surface functionalization via synergistic grafting of surface-modified silica nanoparticles and layered double hydroxide nanosheets for fabrication of superhydrophilic but relatively oleophobic antifouling membranes

Engineering of Ag-nanoparticle-encapsulated intermediate layer by tannic acid-inspired chemistry towards thin film nanocomposite membranes of superior antibiofouling property

Bioadhesion-inspired Surface Engineering Constructing Robust, Hydrophilic Membranes for Highly-Efficient Wastewater Remediation

A green strategy to immobilize silver nanoparticles onto reverse osmosis membrane for enhanced anti-biofouling property

Engineering amphiphilic membrane surfaces based on PEO and PDMS segments for improved antifouling performances

Functionalization of seawater reverse osmosis membrane with quorum sensing inhibitor to regulate microbial community and mitigate membrane biofouling

Reverse osmosis membranes with guanidine and amine enriched surface for biofouling and organic fouling control

Antibiofouling Thin‐Film Nanocomposite Membranes for Sustainable Water Purification

Biomimetic Silicification on Membrane Surface for Highly Efficient Treatments of Both Oil-in-Water Emulsion and Protein Wastewater.