Abstract:There are three difficulties in the topology optimization problem of continuum structure:1) The problem under multiple load case is not easy to be approached than that under single load case, because the former becomes a multiple objective problem on the basis of compliance objective function. 2) The problem with local constraints, such as elemental stress limit, is not easy to be solved than that with global constraints, such as displacement or frequency limits, because sensitivity analysis of the former has too expensive computation. 3) The problem with a phenomenon of ill-conditioned load, which is similar to ill-conditioned stiffness matrix in the structural analysis, is not easy to get reasonable final topological structure, because the former is difficult to consider different influences between the loads with small forces and the loads with big forces, and some of topology paths of transferring small forces may disappear during the process of iteration. To overcome the above difficulties, some measures are adopted as follows:1) Topology optimization model is established by independent continuous mapping (ICM) method. 2) Based on the von Mises criteria in theory of elastic failure, all element’ s stress constraints are transformed into a structural energy constraint, namely, a global constraint substitutes for lots of local constraints. 3) The phenomenon of the ill-conditioned load is divided into three cases: (a) Ill-condition exists between load cases, but not within each load case; (b) Ill-condition exists within some load case; (c) Ill-condition exists not only between load cases, but also within some load case. (4) A strategy based on strain energy is proposed to adopt ICM method with stress globalization, and the problems of the three cases of ill-conditioned load mentioned above are solved in term of different complementary approaches one by one. Numerical examples show that the topology path of transferring forces can be obtained more easily by substituting global strain energy constraints for local stresses constraints, and the problem of ill-conditioned load can be solved well by the weighting method which takes structural energy as weighting coefficient.

Static and Dynamic Size Optimization of Nonlinear Continuous Structure Based on Fully Stressed Design

Size Optimization Design of Members for Shear Wall High-Rise Buildings

Discrete Sizing Optimization Method Based on Dividing Rectangles Algorithm and Local Response Surface for Steel Frame Structures

Finite Strain Topology Optimization with Nonlinear Stability Constraints

The Path-Engulfment Method for Topology Optimization of Structures

Simultaneously Static and Dynamic Layout Designs of Stiffening Structures

Stress-Oriented Structural Optimization for Frame Structures

Fully Stressed Design of Frame Structures and Multiple Load Paths

Automatic structural optimization design using sensitivity-based method

Dynamic Stiffness Design of Plate/shell Structures Using Explicit Topology Optimization

Modal Strain Based Method for Dynamic Design of Plate-Like Structures

A systematic topology optimization approach for optimal stiffener design

An Intelligent Computational Approach for Design Optimization of Stiffened Engineering Structures

Optimization design of large span portal-rigid steel frame with tapered sections under wind-induced drift constraint

A fatigue-resistance topology optimization formulation for continua subject to general loads using rainflow counting

Dynamic Layout Optimization of Stiffeners in Plate Structures Based on Power Flow Response

An improved evolutionary structure optimization method considering stress minimization and smooth design

Simple approach to structural topology optimization for continuous structures

Nonlinear Optimization of Orthotropic Steel Deck System Based on Response Surface Methodology

Equal-Stability Level Based Optimal Stiffener Design for Moderately Thick Plates

Topology Optimization of Continuum Structure With Globalization of Stress Constraints